Automotive digital design testing webinars

The massive increase of in-vehicle data-processing is a challenge for automotive networks and processors. Our dedicated webinars will support you with issue about CAN Bus or Automotive Ethernet debugging and compliance testing, as well as for performance, EMI and interoperability testing of ECUs and domain controllers in R&D and production.

Webinar: How to ensure MultiGigabit automotive Ethernet compliance

How to ensure MultiGigabit automotive Ethernet compliance

Join this webinar to learn about the newest updates to OPEN Alliance TC9 & TC15 and receive an in-depth analysis of different MultiGigabit test modes with solutions from Rohde & Schwarz.

Webinar: Manufacturing test of automotive ECUs with maximum efficiency

Manufacturing test of automotive ECUs with maximum efficiency

Join us in this webinar to learn about manufacturing tests for automotive ECUs with solutions from Rohde & Schwarz.

Webinar: Automotive Ethernet and next-gen in-vehicle networks

Automotive Ethernet and next-gen in-vehicle networks

Join us in our webinar series and learn about technological aspects of automotive Ethernet and next-gen in-vehicle networks withthe testing solutions from Rohde & Schwarz.

Webinar: An overview on Ethernet testing - Teaser

An overview on Ethernet testing

This webinar is created for engineers who work on Ethernet design and test. You will get an introduction on the purpose and the different standards and applications of this digital interface. Challenges, specifications and test procedures open the webinar’s test and measurement core.

Webinar: Domain controllers and CPUs

Domain controllers and high performance CPUs for automotive

Testing and debugging Automotive domain controllers / high performance CPUs on their in-vehicle network interfaces, their performance and interoperability.

Register now and watch the free webinar.

1000BASE-T1 automotive Ethernet compliance testing

1000BASE-T1 automotive Ethernet compliance testing

This webinar will focus on 1000BASE-T1 automotive Ethernet compliance testing based on the Open Alliance (OA) TC8 specification for the physical layer. We will discuss the individual test cases for 1000BASE-T1 and look at the pitfalls that an engineer might encounter during test setup and execution.

Webinar: Automotive EMI testing overview and updates - CISPR 25 introduction

Automotive EMI testing overview and updates - CISPR 25 introduction

This webinar provides an overview of CISPR and new developments in CISPR product standards for emission measurements.

Ready for RED - Part 1

Ready for RED - Part 1

The ETSI has specified a new mandatory test requirement, the radio equipment directive (RED),that applies to radio and television broadcast receivers sold into Europe. From June 13, 2017 on, all manufacturers have to test their entertainment systems to meet the ETSI harmonized standards EN 303 340 (digital TV broadcast receivers) and EN 303 345 (radio broadcast receivers). The R&S®BTC broadcast test center from Rohde & Schwarz offers the turnkey solution in a single box.

Ready for RED – Part 2: DAB car radio testing with the R&S®BTC

Ready for RED – Part 2: DAB car radio testing with the R&S®BTC

The ETSI has specified a new mandatory test requirement, the radio equipment directive (RED), that applies to radio and television broadcast receivers sold into Europe. From June 13, 2017 on, all manufacturers have to test their entertainment systems to ensure they meet the ETSI harmonized standards EN 303 340 (digital TV broadcast receivers) and EN 303 345 (radio broadcast receivers). We will demonstrate, step by step, how to perform audio measurements on a DAB car radio receiver with the R&S®BTC for EN 303 345 compliance testing.

Ready for RED – Part 3: Quasi Peak measurements on FM radios according to EN 303 345

Ready for RED – Part 3: Quasi Peak measurements on FM radios according to EN 303 345

The ETSI has specified a new mandatory test requirement, the radio equipment directive (RED), that applies to radio and television broadcast receivers sold into Europe. From June 13, 2017 on, all manufacturers have to test their entertainment systems to meet the ETSI harmonized standards EN 303 340 (digital TV broadcast receivers) and EN 303 345 (radio broadcast receivers). The R&S®BTC broadcast test center from Rohde & Schwarz offers the turnkey solution in a single box.

Automotive Ethernet Measurements using Oscilloscopes

Automotive Ethernet Measurements using Oscilloscopes

In this webinar you will get an overview of Automotive Ethernet Technologies. You will get more information about the OPEN Alliance and how to easily perform the required tests. We will explain how to capture and decode electrical signals in a full duplex communication.

Debugging automotive Ethernet using the trigger & decode

Debugging automotive Ethernet using the trigger & decode

In this webinar we explain how Rohde & Schwarz made it possible to debug 100BASE-T1 automotive Ethernet as CAN networks are debugged. We will show examples, such as how bus analysis via triggering and decoding helps in developing ECUs with automotive Ethernet interfaces.

Related webinar series

Automotive radar testing webinars

More information

Automotive connectivity testing webinars

More information

Webinar overview

More information

Solutions for

需要更多信息。

如果您有任何疑问或需要了解更多信息,请填写此表格,我们会尽快回复您。

我同意通过以下方式接收罗德与施瓦茨提供的信息:

推广许可

这意味着什么?

我同意,在网站Imprint中提到的Rohde & Schwarz GmbH & Co. KG和罗德与施瓦茨实体及分支机构 可出于营销和广告之目的(例如提供特价优惠和折扣促销信息)而通过选定渠道(电子邮件或邮政信件)与我联系并提供相关信息,包括但不限于测试与测量、安全通信、监测与网络测试、广播电视与媒体以及网络安全领域的产品和解决方案相关信息

您的权利

您可以随时发送电子邮件至 news@rohde-schwarz.com 撤销此同意声明,邮件主题注明“Unsubscribe”即可。此外,我们发送给您的每一封电子邮件中都含有电子邮件取消订阅链接。有关个人数据使用和撤销程序的详情,请参阅“隐私声明”

你的申请已提交,我们稍后会联系您。
An error is occurred, please try it again later.