FSW 产品手册及数据手册

FSW - EU Declaration of Conformity

Technical specifications of the FSW signal and spectrum analyzer.

The high-performance FSW signal and spectrum analyzer helps engineers accomplish the most demanding tasks. Its wide internal analysis bandwidth allows the characterization of wideband components and communications systems. Its unparalleled phase noise facilitates the development of high-performance oscillators such as those used in radars. A state-of-the-art multitouch display with gesture support ensures straightforward and intuitive operation. An embedded SCPI recorder enables easy creation of executable scripts.

R&S®FSW-K97 - Fact Sheet 手册及数据表

Specifications for the R&S®FSW-K17 Multicarrier Group Delay Measurements option for the R&S®FSW signal and spectrum analyzer

Reference measurements for calibrating navigation receivers, Production test measurements of ILS/VOR ground stations, Measurement and calibration of ramp testers

FSW Signal and Spectrum Analyzer | 信号与频谱分析仪 - Product Brochure 手册及数据表 Product brochure

This document provides the technical specifications of the R&S®VSE-K149/FSx-K149 high rate pulse repetition frequency ultrawideband measurements.

Market-leading EVM performance in millimeter wave range

Technical specifications of the R&S®FSW-K201 OneWeb Reverse Link (SC-FDMA) measurement application for the R&S®FSW signal and spectrum analyzer

This document provides the technical specifications of the R&S®FSW-K95/-K97 WLAN IEEE 802.11ad/ay measurement application.

English (PD 3606.7724.22)

DOCSIS testing requirements include supporting a full channel load and coexistence of both DOCSIS 3.0 and DOCSIS 3.1 signals (in some cases analog TV as well). The R&S®CLGD is the only flexible and compact solution available on the market that can meet these testing requirements. The introduction of much wider bandwidths for DOCSIS 3.1 along with higher constellation modes (up to 16kQAM) require very powerful spectrum and signal analyzers. The R&S®FSW is ideal since it can measure MER that is typically 57 dB and higher and also provide BER measurements based on DOCSIS 3.1 signals.

Specifications dokument

English (PD 3607.1842.22)

R&S®FSW firmware 5.30 and R&S®FSVA3000/R&S®FSV3000 firmware 2.20 support

English (PD 5214.6616.22)

R&S®FSW-B512R real-time spectrum analyzer 512 MHz, R&S®FSW-B800R real-time spectrum analyzer 800 MHz, R&S®FSW-K161R real-time spectrum measurement application 160 MHz, R&S®FSW-K512RE real-time spectrum measurement application 512 MHz, R&S®FSW-K800RE real-time spectrum measurement application 800 MHz

This document provides the technical specification of the EMI measurement application for signal and spectrum analyzers – R&S®FSW-K54, R&S®FSV3-K54, R&S®FPL1-K54, R&S®FSV-K54.

The EMI measurement application (K54 option) adds EMI precompliance measurement functions to the following spectrum analyzers: R&S®FSW, R&S®FSVA3000, R&S®FSV3000, R&S®FPL1000 and R&S®FSVR. It is the ideal EMI analysis extension for product development and a smooth certification process. Typical application fields include commercial, automotive, avionics and military product development (CISPR, EN, FCC, DO‑160 and MIL-STD-461 standards).

This document provides the technical specifications of the R&S®Fxx-K30 noise figure measurement application.

This document provides the technical specifications of the Bluetooth® measurement application.

全面解读IEEE 802.15.4ab

This document provides the technical specifications of the R&S®FSW3-KM107/R&S®Fxx-K7/ESW-K7/VSE-K7/RTO AM/FM/PM modulation analysis option.

This document provides the technical specifications of the R&S®FSW3-KM101/-102/-103/FSx-K70/-K70M/-K70P/VSE-K70/-K70M/-K70P vector signal analysis application.

This document provides the technical specifications of the R&S®FSW3-KM112, R&S®FSx-K96 and R&S®VSE-K96 options.

This document provides the technical specifications of the R&S®FSW3-KM125/-KM126, R&S®Fxx-K30 noise figure measurement application.

R&S®VSE-K91/FSx-K91/FPS-K91 WLAN IEEE 802.11a/b/g/j/p/n/ac/ax/be Measurement Application - Specifications 手册及数据表 Specifications

This document provides the technical specifications of the R&S®FSW3-KM129/-K130 and R&S®Fxx-K40 options.

This document provides the technical specifications of the R&S®FSW3-KM320/-KM321/-KM324/-KM326/-KM327/-KM331/-KM335, R&S®FSx-K144/-K145/-K147/-K147C/-K148/-K171/-K175/-K184 and R&S®VSE-K144/-144X/-K146/-K148/-K171/-K175/-184.

罗德与施瓦茨的信号生成和分析解决方案覆盖亚太赫兹频率范围。我们的信号生成和分析解决方案产品组合能够满足5G和未来技术的带宽与频率要求，并提供丰富的功能和应用软件，有效应对各种测试挑战。

This document provides the technical specifications of the R&S®FSW3-KM118/-KM119/-KM120/-KM121, R&S®Fxx-K18(F/D/M), R&S®VSE-K18(F/D/M) options.

Rohde & Schwarz has signal generation and analysis solutions that cover up to sub-THz frequencies. Our signal generation and analysis solution portfolio addresses the bandwidth and frequency requirements for 5G and beyond, offering a wide range of features and application Software for any testing challenge.

The -K10x options cover the inband measurements of 3GPP LTE and LTE advanced. The R&S®VSE-K100/-K102/-K104 options provide convenient analysis due to automatic detection of modulation formats. Each signal subframe is analyzed and the QPSK, 16QAM or 64QAM modulation formats plus the length of the cyclic prefix are automatically detected and used in the analysis. The cell identity can also be automatically detected, which reduces the number of settings required by the user to a minimum.

Rohde & Schwarz signal and spectrum analyzers equipped with the R&S®FSx-K30 option form the basis of a solution to accurately measure the noise figure in the millimeterwave frequency range using the Y-factor method.

K147 option for FSW and FSV3000

This document provides the technical specifications of the R&S®VSE-K10, R&S®FSx-K10 GSM measurements

English (PD 3607.2078.82)

AESA and antenna testing

面向设备制造商的测试与测量解决方案指南

This white paper describes how a QAgent deployment might be handled to lessen the impact on production or lab environments.

Choosing the right instrument for your application

罗德与施瓦茨提供卫星市场所需的测试与测量解决方案，帮助工程师开发和测试卫星转发器、模块和组件。

The measurement setup includes an R&S®FSW or R&S®FSV(A)3000 signal and spectrum analyzer or R&S®VSE compliant instruments with an R&S®SMW200A, R&S®SMM100A or R&S®SMBV100A vector signal generator. The closed loop system enables control of the signal generator and automatic synchronization.

Specifications of R&S®VSE-K60(x) / FSx-K60(x) Transient Measurements

Rohde & Schwarz helps engineers develop and test satellite transponders, modules and components by providing the test and measurement solutions that the satellite market needs.

High precision test solutions for todays and tomorrows ADAS-radar

This document provides the technical specifications of the R&S®ZN-ZCG comb generator.

本手册将介绍我们的空口(OTA)和天线测试解决方案，帮助您在实验室突破极限。

This brochure gives you an overview of our over-the-air (OTA) and antenna test solutions that, once in your lab, can help you push the boundaries of what’s possible.

This document provides the technical specifications of the R&S®FSx-K50 spurious measurement application.

Signal and spectrum analyzers

This document provides the technical specifications of the R&S®VSE-K106/FSx-K106/FPS-K106 EUTRA/LTE NB-IoT measurement application.

Enhanced Specifications for AM/FM/φM Modulation Analysis

A milestone for R&S®ZNA based enhanced amplifier and converter testing

Test solutions for safety and security in the new aviation era

English (PD 3607.1736.82)

RF amplifier testing

T&M solution guide for network infrastructure equipment providers