R&S®FSWP 相位噪声分析仪将低噪声内部源与实时互相关技术相结合，为相位噪声测量提供了高灵敏度。

R&S®FS-SNS 智能噪声源自动加载所有必要的设置参数，从而准确地测量噪声系数和增益。在此了解更多。

极为灵敏的相位噪声测量和实时互相关技术，便于更快进行 VCO 测试和相位噪声分析。 探索 R&S®FSPN

将罗德与施瓦茨强大的信号分析体验和功能应用于电脑和云端

This paper reviews the classical spectrum analyzer measurement of L(f) and its shortcomings and discusses how modern phase noise test sets measure phase noise and avoid the limitations imposed by direct spectrum measurements.

Mar 31, 2020

Models: R&S®FSWP8, R&S®FSWP26, R&S®FSWP50

Models: R&S®FSWP8, R&S®FSWP26, R&S®FSWP50

Models: R&S®FSWP8, R&S®FSWP26, R&S®FSWP50

本应用指南将讨论一些会影响测量速度的测量设置，并针对提高整体测量速度提供相关建议。

10月 08, 2020 | AN-No. GFM354

此应用指南描述了使用新型 R&S®FSWP 相位噪声分析仪的相位噪声测量不确定度分析和可追溯性。

7月 05, 2016 | AN-No. 1EF95

Technical specifications of the R&S®FSWP phase noise analyzer and VCO tester.

The R&S®FSWP phase noise analyzer and VCO tester features very high sensitivity thanks to extremely low noise internal sources and cross-correlation. It can measure phase noise on highly stable sources such as those found in radar applications in just seconds. Additional options such as pulsed signal measurements, residual phase noise characterization and integrated high‑end signal and spectrum analysis make the R&S®FSWP a unique test instrument. A multitouch display ensures straightforward and intuitive operation. The embedded SCPI recorder enables easy creation of executable scripts.

R&S®FSWP 相位噪声分析仪和 VCO 测试仪是一种高端仪器，能够准确分析关键雷达和通信系统组件的噪声。

5月 16, 2025

R&S®FSWP Dynamic noise figure measurements - Application Card

FSWP - EU Declaration of Conformity

R&S®FSWP 相位噪声分析仪是验证时钟源的合适工具，确保满足设计的准确性要求并能正常运作。

9月 30, 2021

R&S®FSWP (Facelift) Phase Noise Analyzer and VCO Tester | 相位噪声分析仪和VCO测试仪 - Product Brochure 手册及数据表 Product brochure

此应用指南回顾了残余噪声或加性噪声的基本原理，并介绍了测量技术以测定双端口设备增加的幅度 (AM) 和相位噪声，例如放大器、混频器、块变频器、倍频器、分频器和频率合成器。

10月 09, 2017 | AN-No. 1EF100

此应用指南将关注雷达系统等应用的脉冲射频载波的相位噪声测量。

5月 18, 2016 | AN-No. 1EF94

R&S®FSWP-K7CAL Enhanced Specifications for AM/FM/φM Modulation Analysis - Specifications

此应用指南提供了有关频率和相位稳定时间测量的基本信息，并介绍了如何使用现代相位噪声分析仪执行测量。

6月 28, 2018 | AN-No. 1EF102

本文介绍的替代方法采用了可直接降频转换 DUT 信号的低相位噪声本振。

5月 09, 2016

推荐使用具备时频域分析能力的抖动测量仪表来进行分析，以区分被测信号的快速和慢速变化的失真。

8月 22, 2017

6月 17, 2025 | 新闻发布 | Test & measurement

罗德与施瓦茨（以下简称“R&S”）针对未来应用需求升级R&S FSWP相位噪声分析仪。全新R&S FSWP-B56G选件将频率范围扩展至56 GHz，通过支持外接高端信号源作为本振，该设备兼具易用型信号源分析仪与高端相位噪声测试仪的双重优势。为满足放大器附加相位噪声和残余相位噪声的测量需求，R&S还将内置信号源频率范围提升至54 GHz。此外，该设备新增了简便创新的噪声系数测量功能。

This paper describes the measurement of additive/residual phase noise of power amplifiers or multipliers for example for automotive RADAR sensors at 80 GHz using the interferometric measurement approach in combination with a phase noise and VCO tester R&S FSWP. The setup provides a way to characterize the additive/residual phase noise of amplifiers down to -150 dBc/Hz at 100 kHz offset even in the microwave range at 80 GHz.

Sep 11, 2024 | AN-No. 1EF117

Specifications dokument

提供所需信息完成使用前准备工作，并开始使用仪器。介绍基本操作和处理方法。

This document provides the technical specifications of the R&S®Fxx-K30 noise figure measurement application.