R&S®RTO2000 - 常见问题

结果 28
  • Leackage breaker trips when probe is connected to main line

    Leackage breaker trips when probe is connected to main line RTC, RTB, RTM, RTA, RTE, RTO, Leakage breaker We want to measure the voltage of the main line with our oscilloscope. Leackage breaker trips when probe is connected to main line RTC, RTB, RTM, RTA, RTE, RTO, Leakage breaker We want to measure the voltage of the main line with our oscilloscope. Related Products

  • Accuracy of RMS Measurements

    Accuracy of RMS Measurements FAQ, RTO, RTE, Accuracy of RMS Measurements Accuracy of RMS Measurements Accuracy of RMS Measurements FAQ, RTO, RTE, Accuracy of RMS Measurements Accuracy of RMS Measurements Related Products

  • RT-ZSxx – more noise with active probes?

    RT-ZSxx – more noise with active probes? Probes, reduce noise, RTM, RTA, RTE, RTO, RTP, RT-ZSxx I have compared passive and active probes. It seems that the noise with active probes is higher. What is the reason and what can I do to reduce the noise? RT-ZSxx – more noise with active probes? Probes, reduce noise, RTM, RTA, RTE, RTO, RTP, RT-ZSxx I have compared passive and active probes. It seems that

  • RTE/RTO/RTP - Zoom shows ringing effects

    RTE/RTO/RTP - Zoom shows ringing effects RTE, RTO, RTP, Zoom When I use the zoom function to look at the rising edge of a rectangle signal, I see ringing which is not real, see screenshot. What is the reason? RTE/RTO/RTP - Zoom shows ringing effects RTE, RTO, RTP, Zoom When I use the zoom function to look at the rising edge of a rectangle signal, I see ringing which is not real, see screenshot. What

  • RTO/RTP-K11 I/Q software interface - sample script for configuration and data query

    RTO/RTP-K11 I/Q software interface - sample script for configuration and data query RTO, RTP-K11, I/Q software interface, sample script, configuration, data query The SCPI sequence for configuration and data query for the I/Q software interface option K11. RTO/RTP-K11 I/Q software interface - sample script for configuration and data query RTO, RTP-K11, I/Q software interface, sample script, configuration

  • RTE/RTO/RTP: Measurement of the level at a designated frequency in FFT with remote commands

    RTE/RTO/RTP: Measurement of the level at a designated frequency in FFT with remote commands RTE, RTO, RTP, measurement, designated frequency, FFT, remote commands RTE/RTO/RTP: Measurement of the level at a designated frequency in FFT with remote commands. RTE/RTO/RTP: Measurement of the level at a designated frequency in FFT with remote commands RTE, RTO, RTP, measurement, designated frequency, FFT

  • 一次采集同时导出模拟和数字通道数据

    一次采集同时导出模拟和数字通道数据 FAQ, RTE, RTO 导出同一采集的模拟和数字通道 一次采集同时导出模拟和数字通道数据 FAQ, RTE, RTO 导出同一采集的模拟和数字通道 相关产品

  • 解码 SENT 协议时显示 CRC 错误

    解码 SENT 协议时显示 CRC 错误 解码, SENT 协议, CRC 错误, RTO, RTE, RTP 常见问答——解码 SENT 协议时显示 CRC 错误 解码 SENT 协议时显示 CRC 错误 解码, SENT 协议, CRC 错误, RTO, RTE, RTP 常见问答——解码 SENT 协议时显示 CRC 错误 相关产品

  • 偏移更改 RMS 测量

    偏移更改 RMS 测量 偏移, 更改 RMS, 测量, RTE, RTO, RTP 当我进行 RMS 测量并应用偏移时,测量结果更改。我没有在其他示波器上发现这个问题。这里出了什么问题? 偏移更改 RMS 测量 偏移, 更改 RMS, 测量, RTE, RTO, RTP 当我进行 RMS 测量并应用偏移时,测量结果更改。我没有在其他示波器上发现这个问题。这里出了什么问题? 相关产品

  • R&S®Scope Suite——与示波器通信时出错

    R&S®Scope Suite——与示波器通信时出错 Scope Suite, RTO2000, 错误, 与示波器通信 R&S®Scope Suite——与示波器通信时出错 R&S®Scope Suite——与示波器通信时出错 Scope Suite, RTO2000, 错误, 与示波器通信 R&S®Scope Suite——与示波器通信时出错 相关产品

  • 无法将 R&S®Scope Suite 连接至 RTO/RTP

    无法将 R&S®Scope Suite 连接至 RTO/RTP 常见问题, RTO, RTE, Scope Suite 无法将 R&S®Scope Suite 连接至 RTO/RTP 无法将 R&S®Scope Suite 连接至 RTO/RTP 常见问题, RTO, RTE, Scope Suite 无法将 R&S®Scope Suite 连接至 RTO/RTP 相关产品

  • WEB control is not working with the RTO

    WEB control is not working with the RTO RTO, WEB control, network WEB control is not working with the RTO. WEB control is not working with the RTO RTO, WEB control, network WEB control is not working with the RTO. Related Products

  • RTO - Export of waveform data into MATLAB

    RTO - Export of waveform data into MATLAB RTO1000, RTO1002, RTO1004, RTO1012, RTO1014, RTO1022, RTO1024, RTO1044, RTO2000, RTO2002, RTO2012, RTO2022, RTO2032, RTO2004, RTO2014, RTO2024, RTO2034, RTO2044, RTO2064 I want to export the waveform data of my RTO scope into MATLAB, but the only way I found so far is the screenshot option. Is there another way to use the trace data in my script? RTO - Export

  • RTE/RTO/RTP Autologon recovery

    RTE/RTO/RTP Autologon recovery RTE, RTO, RTP, Autologon At startup of RTE/RTO/RTP Windows asks for user and password. How can I get back the autologon function? RTE/RTO/RTP Autologon recovery RTE, RTO, RTP, Autologon At startup of RTE/RTO/RTP Windows asks for user and password. How can I get back the autologon function? Related Products

  • RTE、RTO、RTP 频率测量换算为以周期/分钟为单位

    RTE、RTO、RTP 频率测量换算为以周期/分钟为单位 常见问答, RTO, RTE, RTP, 频率测量换算 RTE、RTO、RTP 频率测量换算为以周期/分钟为单位 RTE、RTO、RTP 频率测量换算为以周期/分钟为单位 常见问答, RTO, RTE, RTP, 频率测量换算 RTE、RTO、RTP 频率测量换算为以周期/分钟为单位 相关产品

  • “提示音”音量调整

    “提示音”音量调整 常见问题, RTO, RTE, RTP “提示音”音量调整 “提示音”音量调整 常见问题, RTO, RTE, RTP “提示音”音量调整 相关产品

  • R&S Scope Suite - eMMC compliance test fails

    R&S Scope Suite - eMMC compliance test fails Scope Suite, eMMC compliance test fails, RTO, RTP R&S Scope Suite - eMMC compliance test fails R&S Scope Suite - eMMC compliance test fails Scope Suite, eMMC compliance test fails, RTO, RTP R&S Scope Suite - eMMC compliance test fails Related Products

  • Change the input impedance with SCPI commands

    Change the input impedance with SCPI commands Input impedance, 50 Ohm, 1 MOhm, SCPI command How can I switch between the input impedance of 50 Ohm and 1 MOhm by using SCPI command. Change the input impedance with SCPI commands Input impedance, 50 Ohm, 1 MOhm, SCPI command How can I switch between the input impedance of 50 Ohm and 1 MOhm by using SCPI command. Related Products

  • RTE/RTO/RTP - how can I calculate the blind time in ultra segmentation mode?

    RTE/RTO/RTP - how can I calculate the blind time in ultra segmentation mode? RTE, RTO, RTP, ultra segmentation, blind time I am using the ultra segmentation mode to minimize the blind time. But this is not indicated. Is there a way to calculate it? RTE/RTO/RTP - how can I calculate the blind time in ultra segmentation mode? RTE, RTO, RTP, ultra segmentation, blind time I am using the ultra segmentation

  • RTO / RTP Firmware Update from an older Version

    RTO / RTP Firmware Update from an older Version RTO, RTP, Firmware update RTO / RTP Firmware Update from an older Version RTO / RTP Firmware Update from an older Version RTO, RTP, Firmware update RTO / RTP Firmware Update from an older Version Related Products

  • RTE/RTO/RTP - export of the history into one file with remote commands

    RTE/RTO/RTP - export of the history into one file with remote commands RTE, RTO, RTP, history, export into one file RTE/RTO/RTP - export of the history into one file with remote commands RTE/RTO/RTP - export of the history into one file with remote commands RTE, RTO, RTP, history, export into one file RTE/RTO/RTP - export of the history into one file with remote commands Related Products

  • RTO-K11 IQ Software Interface shows "CF+BW/2 > DevBW"

    RTO-K11 IQ Software Interface shows "CF+BW/2 > DevBW" RTO-K11, IQ Software Interface, CF+BW/2, DevBW When yout set the carrier frequency and the filter bandwidth, you get the warning "CF + BW/2 > DevBW". RTO-K11 IQ Software Interface shows "CF+BW/2 > DevBW" RTO-K11, IQ Software Interface, CF+BW/2, DevBW When yout set the carrier frequency and the filter bandwidth, you get the warning "CF + BW/2 > DevBW

  • Programming examples for oscilloscopes

    Programming examples for oscilloscopes Programming examples, oscilloscopes, RTH, RTC, RTC1000, RTB, RTB2000, RTM, RTM3000, RTA, RTA4000, RTE, RTE1000, RTO, RTO1000, RTO2000, RTO6, RTP Programming examples for oscilloscopes. Programming examples for oscilloscopes Programming examples, oscilloscopes, RTH, RTC, RTC1000, RTB, RTB2000, RTM, RTM3000, RTA, RTA4000, RTE, RTE1000, RTO, RTO1000, RTO2000, RTO6

  • 加密狗对 FS-K96 是否必要?

    加密狗对 FS-K96 是否必要? FS-K96, FS-K96PC, FSQ, FSG, FSUP, FSV, FSVR, RTO 是否始终需要 FSPC 加密狗许可证 (1310.0002.03) 以便运行 FS-K96 软件? 加密狗对 FS-K96 是否必要? FS-K96, FS-K96PC, FSQ, FSG, FSUP, FSV, FSVR, RTO 是否始终需要 FSPC 加密狗许可证 (1310.0002.03) 以便运行 FS-K96 软件? 相关产品

  • 将波形导出至 csv 文件时 Excel 中显示错误值

    将波形导出至 csv 文件时 Excel 中显示错误值 RTO, RTE, RTP, RTM, RTB, RTC, RTA 我已将波形导出至 csv 文件。但是,当我在 Excel 中打开文件时,数值完全错误。我如何能得到正确值? 将波形导出至 csv 文件时 Excel 中显示错误值 RTO, RTE, RTP, RTM, RTB, RTC, RTA 我已将波形导出至 csv 文件。但是,当我在 Excel 中打开文件时,数值完全错误。我如何能得到正确值? 相关产品

  • 使用 RT-ZF2 测试夹具连接被测设备和链路伙伴

    使用 RT-ZF2 测试夹具连接被测设备和链路伙伴 RTO, RTP, RT-ZF2 使用 RT-ZF2 测试夹具连接被测设备和链路伙伴 使用 RT-ZF2 测试夹具连接被测设备和链路伙伴 RTO, RTP, RT-ZF2 使用 RT-ZF2 测试夹具连接被测设备和链路伙伴 相关产品

  • Number of harmonics in RTE/RTO Power option

    Number of harmonics in RTE/RTO Power option Number of harmonics in RTE/RTO Power option Number of harmonics, RTE, RTO, Power option, FAQ Number of harmonics in RTE/RTO Power option Number of harmonics in RTE/RTO Power option Number of harmonics, RTE, RTO, Power option, FAQ Related Products

  • Which test fixture for MDI mode conversion measurement at 100Base T1 Compliance Test?

    Which test fixture for MDI mode conversion measurement at 100Base T1 Compliance Test? MDI mode, conversion, 100Base T1, compliance test, RTO, RTP, Scope Suite Which test fixture for MDI mode conversion measurement at 100Base T1 Compliance Test? Which test fixture for MDI mode conversion measurement at 100Base T1 Compliance Test? MDI mode, conversion, 100Base T1, compliance test, RTO, RTP, Scope Suite

谢谢。

您的要求已成功发送!

我们会尽快与您取得联系。

您的 罗德与施瓦茨团队

Download

请输入您的名字。

请输入有效的电子邮件地址。

请输入您的姓名。

请输入您的公司名称。

请输入您的国家/地区。

推广许可
请输入图示字符
show captcha

输入错误。
International Website