Rohde & Schwarz MNT network measurement solution based on Samsung Galaxy S10 5G

Rohde & Schwarz mobile network testing solutions are compatible with commercially available 5G mobile phones including those equipped with the Qualcomm® Snapdragon™ X55 5G modem

After extensive pre-commercial trials, 5G NR is now moving to the deployment phase and the true test that 5G is delivering the required Quality of Experience (QoE) to subscribers is to use test solutions running on and with real commercial 5G devices. Operators wishing to test the quality and performance of 5G NR mobile networks using commercially available UEs including the Samsung S10 5G can do so now using Rohde & Schwarz mobile network testing solutions such as the QualiPoc Android smartphone-based optimizer, R&S®ROMES4 universal network measurement software or SmartBenchmarker network benchmarking software. This can be realized using a QualiPoc smartphone on its own or combined with a scanning receiver such as the R&S®TSMx6 or full walk test and drive test systems such as the R&S®Freerider 4 backpack or Benchmarker II.

Additionally, Rohde & Schwarz is ready with smartphone-based test solutions (QualiPoc Android) and analysis software (R&S®ROMES4) to test network performance using devices equipped with the Qualcomm® Snapdragon™ X55 5G modem such as the Samsung Note 10+ 5G. The X55 RF-system supports 5G sub-6 GHz and mmWave, TDD/FDD & multi-mode and promises to deliver breakthrough performance. Naturally, Rohde & Schwarz is ready today with test solutions compatible with the latest devices and chips.

5G NR quality and performance metrics from a user perspective using commercial smartphones can be acquired using the QualiPoc Android smartphone-based RF optimization and service quality assessment solution. The range of tests covers full video and App testing using a rooted phone to IP and RF trace data using a commercial off the shelf (COTS) device with open diagnostic ports and additional hardware from R&S, to RF and data testing with a standard COTS phone.

Critical 5G NR UE-based measurements such as data performance KPIs, serving cell information, signalling and RF metrics using commercially available UEs such as the Samsung S10 5G, Xiaomi Mi Mix 3, Oppo Reno 5G and the LG V50 ThinQ can be conducted using R&S®ROMES4 universal software platform for network engineering, optimization and troubleshooting supports. ROMES4 is compatible with either rooted phones or COTS UEs with open LTE and 5G diagnostic ports.

SmartBenchmarker web-based benchmarking campaign control software and SmartAnalytics QoE analysis software are fully compatible with the 5G capabilities of data acquisition hardware such as Benchmarker II, Freerider 4 and Benchmarker2Go; enabling 5G optimization and benchmarking campaigns to be planned, manager and executed whenever required.

The R&S®Freerider 4 backpack system for network optimization, benchmarking and analysis supports the range of R&S mobile network testing solutions (QualiPoc, ROMES4 and SmartBenchmarker) and is compatible with 5G UEs. It can accommodate up to 12 UEs and 2 scanners or 8 UEs and 4 scanners to measure 4x4 MIMO and, with the addition of a downconverter, can cover the 28GHz 5G NR band.

Devices containing the Qualcomm Snapdragon 855 & X55 or Samsung Exynos 9820 chipset are integrated into our range of mobile network testing solutions, so if you wish to test your 5G NR network today using commercial UEs, please complete the form below and we will be happy to support you.

请求信息

如果您有任何疑问或需要了解更多信息,请填写此表格,我们会尽快回复您。

推广许可

你的申请已提交,我们稍后会联系您。
An error is occurred, please try it again later.