EMC and full-vehicle antenna testing webinars

We have a range of webinars on automotive EMC and Full Vehicle Antenna Testing covering topics from CISPR-25 to a practical approach to testing communication systems over the air and EMI debugging. Increase you knowledge on this topic by watching the series of webinars.

Webinar: Automotive EMC testing under dynamic driving conditions

Register for this webinar to learn about eDrive development, the importance of dynamic EMC testing, EMC standards framework and more.

More information

Full vehicle OTA antenna testing

In this webinar, Dr Benoit Derat, Senior Director of Engineering at R&S, demystifies the topic of "Full vehicle OTA antenna testing" and explains why this technique is essential to ensure reliable automotive connectivity. You will be able to discover the specific requirements of OTA measurements and see some practical examples of test systems.

Join us in this webinar to learn about full vehicle OTA antenna testing with test systems from Rohde & Schwarz.

More information

Webinar: OTA testing of automotive communication systems at vehicle level

OTA testing of automotive communication systems

In this webinar you will learn more about an over-the-air (OTA) test concept and the associated challenges and corresponding solutions.

More information

Automotive EMI testing overview and updates - CISPR 25 introduction

In this webinar you will learn about latest developments in CISPR product standards.

More information

Radio Equipment Directive (RED) and coexistence

The efficient use of spectrum is a key-requirement of the new radio equipment directive (RED). Not only transmitters, but also receivers now have to meet minimum regulatory requirements and need to be tested. This discussion with an EMC testing and regulatory expert goes through all relevant RED regulatory, testing and co-existing topics.

More information

EMI debugging

Meeting EMI and EMC requirements is critical to bringing electronic products to market. Compliance testing requires expensive equipment and test time at a compliance laboratory. Failures found late in the cycle impact project costs and the launch schedule due to debugging and re-testing. This video shows how the R&S RTO oscilloscope can be used with a near- field probe to quickly and reliably find and fix EMI issues during development in the R&D lab to effectively minimize expensive re-testing and shorten the time to market.

More information