Login or register to gain full access to the Knowledge+ platform!
I want to create an account
I already have an account
02:03
Device List
Learn in this short video about R&S®ELEKTRA EMC test automation software how to set up the devices..
Feb 26, 2024
01:42
Reference Calibration Test Report
Learn in this short video about R&S®ELEKTRA EMC test automation software how to create the reference calibration and the test report.
01:32
Run test
Learn in this short video about R&S®ELEKTRA EMC test automation software how to run the test.
01:29
Hardware setup
Learn in this short video about R&S®ELEKTRA EMC test automation software how to set up the test hardware.
01:06
EUT Test Template
Learn in this short video about R&S®ELEKTRA EMC test automation software how to create the EUT test template.
00:46
Path switching
Learn in this short video about R&S®ELEKTRA EMC test automation software how to set up the signal path switching.
01:00
Tools setting
Learn in this short video about R&S®ELEKTRA EMC test automation software how to configure the test basics.
Test Report Configuration
Learn in this short video about R&S®ELEKTRA EMC test automation software how to configure the test report.
02:19
Test Template
Learn in this short video about R&S®ELEKTRA EMC test automation software how to create a test template
02:52
System path calibration
Learn in this short video about R&S®ELEKTRA EMC test automation software how to calibrate the system path..
Attenuation Table
Learn in this short video about R&S®ELEKTRA EMC test automation software how to assign the attenuation table.
39:02
Automotive measurements with R&S®ELEKTRA
In this webinar, we will give a general introduction to our new EMC software ELEKTRA and highlight some features with are relevant for automotive standards.
6月 29, 2021
4:51
R&S®AdVISE 视觉检测软件 – 监控旋转物体
本视频展示了如何使用 R&S®AdVISE 监控旋转物体的旋转次数。
9月 15, 2020
3:40
R&S®AdVISE 视觉检测软件 – 监控模拟指示器
本视频展示了如何使用 R&S®AdVISE 监控模拟指示器。
02:33
R&S®ELEKTRA 保存和调用结果
如何使用 R&S®ELEKTRA 保存和恢复测试结果。
5月 14, 2020
03:04
R&S®ELEKTRA 创建报告
如何使用 R&S®ELEKTRA 创建报告。
4:16
R&S®ELEKTRA 场均匀性
介绍如何执行场均匀性测量。
05:11
R&S®ELEKTRA 定义和应用各项参数
概览如何定义和应用频率列表、衰减因子、转换因子和限值线。
07:01
R&S®ELEKTRA 执行测试
概览如何使用 R&S®ELEKTRA 执行测试。
07:24
R&S®ELEKTRA 创建测试模板
概览如何创建和配置测试模板。
03:53
R&S®ELEKTRA 自动模式和交互模式
介绍 R&S®ELEKTRA 自动模式和交互模式的差别。
02:06
启动 R&S®ELEKTRA
如何启动 R&S®ELEKTRA 软件,并使用配置向导加载事先考量的测试信息和设置。
03:37
R&S®ELEKTRA 连接设备
概览如何通过设备列表将设备连接到 R&S®ELEKTRA。
03:27
R&S®ELEKTRA 硬件装置
概览如何配置硬件装置。
3:22
安装或升级 R&S®ELEKTRA
关于系统要求、安装和升级流程的信息。
5月 05, 2020
2:51
R&S®ELEKTRA 被测设备
本视频将介绍如何设置 EUT(被测设备)。
2:39
R&S®ELEKTRA 5 大要诀与技巧
充分提高 R&S®ELEKTRA 使用效益的五大要诀与技巧。
3:01
导入和导出 R&S®ELEKTRA 数据库
介绍如何导入或导出数据库。
1:26
R&S®ELEKTRA 数据库备份
本视频介绍如何备份 R&S®ELEKTRA 数据库。
3:04
R&S®ELEKTRA 报告模板
介绍可用于制作最终报告的报告模板。
2:17
R&S®ELEKTRA“4 层”准则
介绍“4 层”准则及其在 R&S®ELEKTRA 测试流程中的实施方式。
4:47
R&S®ELEKTRA 图形用户界面概览
快速了解软件的图形界面。
2:23
概览
R&S®ELEKTRA 简介、用途和一般工作原理。
1:38
管理 R&S®ELEKTRA 许可
介绍管理流程的相关要求和实施方式。
1:03
直观的用户界面
10月 25, 2018
0:49
提高测试产量
1:08
快速入门
10月 23, 2018