R&S®NGC100 电源系列

R&S®ESSENTIALS 基本型直流电源

R&S®NGC100 电源系列
打开灯箱
R&S®NGC100 电源系列
打开灯箱
R&S®NGC100 电源系列
打开灯箱
R&S®NGC100 电源系列
打开灯箱
R&S®NGC100 电源系列
打开灯箱
R&S®NGC100 电源系列
打开灯箱
R&S®NGC100 电源系列,低前视图 R&S®NGC100 电源系列,主视图 R&S®NGC100 电源系列,高后视图 R&S®NGC100 电源系列,主视图 R&S®NGC100 电源系列,高前视图 R&S®NGC100 电源系列,低后视图

主要特点

  • 最大输出功率:100 W
  • 每个通道的最大电压:32 V
  • 每个通道的最大电流:3 A、5 A 或 10 A
  • 输出采用电位隔离、浮地且防短路
  • 在线产品配置程序使用直观且价格透明
  • R&S®ESSENTIALS

紧凑易用

R&S®NGC100 直流电源的能效高,即便在最大负荷下也能保持低温和静音的特点。实用接口和连接器便于快速便捷地操作电源,简便功能可用于特殊应用。单通道、双通道或三通道——R&S®NGC100 直流电源的丰富功能和基础规格使其适用于:
-开发实验室
-工业环境
-制造
-教学
现在,您可以使用全新在线配置程序快速设计 R&S®NGC100 直流电源,整个流程中的价格完全透明。您选择的授权分销合作伙伴会立刻处理您的请求。

特性和优点

在多种操作条件下提供最大输出功率

灵活的功率组合

在多种操作条件下获得最大功率。这款电源系列不同于单量程电源,可以在整体功率限制范围内提供不同的电压和电流组合。

模拟真实场景

具有 EasyArb 功能 

EasyArb 功能生成复杂的时变输出电压或电流序列,可以在设计过程的早期阶段模拟电源子系统的正常行为,或者模拟电源问题以验证被测设备设计。 EasyArb 功能可以生成时变输出电压和电流序列,驻留时间低至 10 ms。

记录测量值

分辨率达到毫秒级

进行长期监测、检查测试装置和重复测试条件以便分析电源行为或优化功耗时,数据记录至关重要。R&S®NGC100 电源同时记录所有输出在一段时间内的电压和电流测量结果,最大采集率高达 1000 samples/s。带有时间戳的数据可轻松导出为 CSV 文件以用于分析、报告和存档。

提供更高的电流和电压

并联和串联操作

双通道和三通道型号的所有输出均相互隔离,保证优越的灵活性。通道可以单独使用,也可以串联以提供最大 96 V 的电压,或者并联以提供最大 10 A 的电流。通道完全电位隔离,因此能够连接在一起为平衡电路供电,无需考虑接地问题。

R&S®NGC103 电源的电压最高可达 96 V
打开灯箱

R&S®NGC103 电源的电压最高可达 96 V

控制浪涌电流

具有 EasyRamp 功能

为了控制浪涌电流,部分测试装置需要确保电压持续上升而不是急速增加。借助 EasyRamp 功能,可在 10 ms 到 10 s 时间内持续增加输出电压。

创建上电序列

具有输出延迟

以一定的延迟单独开启每个通道,以满足使用多个电压并需要特定上电序列的先进微控制器的要求。

补偿电压降

使用远端回读功能

通过远端回读改善电压调节特性和测量精度。直接在被测设备输入端而非电源端调节输出电压。远端回读功能可以补偿电源引线上的电压降,特别是在大电流应用中。R&S®NGC100 电源为每个输出通道都提供远端回读连接。

通过远端回读补偿负载引起的电压降
打开灯箱

通过远端回读补偿负载引起的电压降

启动仪器功能

具有外部触发

外部触发信号 (TTL) 馈入电源后面板上的电压接口,能够启动任意波功能、激活/禁用输出延迟或者激活数据记录。
 

直接控制输出电压

具有模拟控制接口

直接快速地控制输出电压。0 V 至 10 V 的外部模拟电压或 4 mA 至 20 mA 的电流可以控制输出,输入比例为 0 至 100%。 控制电压和输出之间采用电位隔离,简化了连接,即使在浮地电路应用中也能维护用户安全。

可用型號

可用型號
型号
Number of output channels
Max. output power
Output voltage per channel
Output current per channel
裸机价格

R&S®NGC101

订单号码 3657.2288.02

Number of output channels
1
Max. output power
100 W
Output voltage per channel
32 V
Output current per channel
10 A
裸机价格
价格要求

R&S®NGC101-G

订单号码 3657.2288.03

Number of output channels
1
Max. output power
100 W
Output voltage per channel
32 V
Output current per channel
10 A
裸机价格
价格要求

R&S®NGC102

订单号码 3657.2359.02

Number of output channels
2
Max. output power
100 W
Output voltage per channel
32 V
Output current per channel
5 A
裸机价格
价格要求

R&S®NGC103

订单号码 3657.2413.02

Number of output channels
3
Max. output power
100 W
Output voltage per channel
32 A
Output current per channel
3 A
裸机价格
价格要求

R&S®NGC103-G

订单号码 3657.2413.03

Number of output channels
3
Max. output power
100 W
Output voltage per channel
32 V
Output current per channel
3 A
裸机价格
价格要求
规格
电气参数
输出通道数 1 / 2 / 3
总输出功率 最大 100 W
每个通道的最大输出功率 100 W/50 W/33 W
每个通道的输出电压 0 V 至 32 V
每个通道的最大输出电流 10 A/5 A/3 A
电压纹波与噪声(20 Hz 至 20 MHz) R&S®NGC101:< 1 mV (RMS)
R&S®NGC102/103:< 450 µV (RMS)
电流纹波与噪声(20 Hz 至 20 MHz) R&S®NGC101:< 1.5 mA (RMS)(测量值)
R&S®NGC102/103:< 1 mA (RMS)(测量值)
负载恢复时间(在设置电压的 ±20 mV 范围内,负载变化 10% 至 90%) < 1 ms(测量值)
电压编程分辨率 1 mV
电流编程分辨率 < 1 A:0.1 mA(R&S®NGC101:0.5 mA)
≥ 1 A:1 mA
输出测量
电压回读分辨率 1 mV
电流回读分辨率 < 1 A:0.1 mA(R&S®NGC101:0.5 mA)
 ≥ 1 A:1 mA
电压回读精度 ±(输出的 % + 偏移量) < 0.05% + 2 mV
电流回读精度 ±(输出的 % + 偏移量) 典型值 < 0.05% + 4 mA(R&S®NGC101:典型值 < 0.15% + 10 mA)
特殊功能
测量功能 电压、电流、功率、能量
保护功能 OVP、OCP、OPP、OTP
FuseLink 功能
开机时保险丝延迟
感应补偿功能
吸收模式 -
顺序输出
外部触发
任意函数 ● (EasyArb)
模拟/调制接口
数据记录
显示屏和接口
显示屏 3.5" QVGA
后面板连接 采用每通道 4 线连接器插头块
远程控制接口:标配 USB、LAN;R&S®NGC100-G 型号配有 IEEE-488 (GPIB)
通用数据
尺寸(宽 × 高 × 深) 222 mm × 97 mm × 291 mm
重量 2.6 kg
机架安装 R&S®HZC95 选件

可用选项

机架适配器
产品
描述
R&S®HZC95

订单号码 5800.2054.02

描述

19" 机架适配器,2 HU,适用于 R&S®NGE100B/NGC100/NPA 和 R&S®HMC 系列

请求信息

如果您有任何疑问或需要了解更多信息,请填写此表格,我们会尽快回复您。

推广许可

你的申请已提交,我们稍后会联系您。
An error is occurred, please try it again later.
大体信息,法律信息

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.