May 06, 2025 | 在线新闻 | Test & measurement

Taking place over two days, Rohde & Schwarz and industry partners will be providing a virtual platform for RF design engineers to enhance their RF expertise and engage with industry leaders at the forefront of innovation. The online event will feature informative presentations by experts from Rohde & Schwarz, The University of Cardiff, Maury Microwave, Qorvo, MathWorks, Analog Devices and Greenerwave.

Jan 04, 2024 | 新闻发布 | Automotive

Analog Devices, Inc. (ADI) and Rohde & Schwarz are helping the automotive industry to adopt wireless battery management system (wBMS) technology which brings technical, environmental, and cost advantages compared with wired battery management systems (BMS). A new automated test solution is tailored for verification and mass production tests of wireless device tests. This development builds on existing efforts for wBMS RF robustness testing.

Nov 11, 2025 | 新闻发布

Rohde & Schwarz, in collaboration with Connektica, NANOWAVE Technologies, and Expleo, will showcase a next-generation satellite payload test bench demonstrator at Space Tech Expo Europe 2025. The new solution targeting space and NewSpace OEMs, will be hosted on the Expleo booth at Europe’s premier space industry event, stand A38 in Hall 4.

Jun 01, 2023 | 新闻发布 | Wireless communications

Rohde & Schwarz has successfully validated 5G RedCap (reduced capability) test cases for its R&S CMX500 one-box signaling tester and R&S TS8980 conformance test system for the recent Conformance Agreement Group (CAG) #74 meeting, allowing the Global Certification Forum (GCF) to activate the respective work items in their device certification program. Manufacturers of IoT chipsets, modems and end devices as well as test houses can now rely on tried-and-tested Rohde & Schwarz solutions for 387 5G RedCap test cases in all device production stages, from early R&D to type approval conformance testing.

Jan 13, 2025 | 新闻发布 | Wireless communications

Bluetest and Rohde & Schwarz extend their long-established collaboration and have integrated the Wi-Fi 7 test functionality of the R&S CMX500 one-box signaling tester into the Bluetest Flow control software. Now, developers and manufacturers of next-generation WLAN technology can use the Bluetest reverberation test systems (RTS) to perform MIMO stress testing of IEEE 802.11be stations as well as access points under realistic conditions.

Jun 18, 2024 | 新闻发布 | EMC testing

13 kW output across broad spectrum

Sep 03, 2024 | 新闻发布 | Test & measurement

Premier microwave, RF, wireless and radar players gather in the city of light for the European Microwave Week (EuMW). Industry-leading T&M specialist Rohde & Schwarz will present a radiating portfolio of products and solutions in Paris for various application fields, pushing the limits in the Gigahertz to Terahertz frequency ranges.

May 23, 2024 | 新闻发布 | EMC testing

Higher field strengths for critical test environments

Mar 06, 2025 | 新闻发布 | Test & measurement

Rohde & Schwarz is set to present a comprehensive suite of EMC and field strength test equipment at the EMV show 2025 in Stuttgart from March 25 to 27, 2025. The display will include standalone instruments, software, and systems designed to meet various industry standards. The solutions support commercial, automotive, military and aerospace standards, as well as ETSI and FCC standards. Visitors can witness these innovative demonstrations at booth number 615.

Jun 06, 2023 | 新闻发布 | Test & measurement

At Automotive Testing Expo Europe 2023 in Stuttgart, Rohde & Schwarz will demonstrate a wide range of cutting-edge test solutions that support automotive applications. With test solutions on show that cover automotive radar, Ethernet, 5G and UWB, the company enables the automotive industry to make the next level of autonomous driving reality.

Aug 25, 2025 | 新闻发布 | Test & measurement

As gold partner for EMC Europe 2025 in Paris, Rohde & Schwarz will present a complete portfolio of solutions for EMC and field strength testing. The company’s EMC experts will share their knowledge and insights through technical sessions focusing on areas like reverberation testing, EMC challenges in power electronics, and the design of modular dual-ridged horn antennas for EMC applications.

Aug 25, 2025 | 新闻发布 | EMC testing

The new BBA series features higher field strengths for critical test environments up to 18 GHz

Nov 14, 2025 | 在线新闻 | Wireless communications

Joint effort centers on design validation, pre-compliance, and OTA/interoperability testing. Advantech AIW-173 modules target demanding use cases in medical imaging, robotics/AMR, rugged devices and ProAV.

Sep 12, 2023 | 新闻发布 | Wireless communications

To support pioneering mmWave and sub-THz research, Rohde & Schwarz continues to roll out advanced RF test and measurement solutions. Three additional products tailored to W and D band applications will be showcased at the EuMW 2023 in Berlin: The new R&S SFI100A wideband IF vector signal generator, the R&S NRP170TWG thermal power sensor and the R&S FE110ST/SR TX/RX frontends. All three enable researchers to characterize devices and circuits for beyond 5G and 6G mobile communications as well as the novel sensing and automotive radar applications of tomorrow.

Dec 21, 2023 | 新闻发布 | Wireless communications

At the recent O-RAN ALLIANCE Global PlugFest Fall 2023, hosted at the i14y Lab in Berlin – supported by Deutsche Telekom and EANTC and i14y consortium partners, Rohde & Schwarz and VIAVI Solutions have presented their integrated solution for conformance testing of O-RAN Radio Units (O-RUs). With their joint test solution, which combines both companies’ industry-leading capabilities, they verified Analog Devices’ innovative 8T8R O-RU reference design according to both O-RAN and 3GPP pre-conformance specifications.

Jan 14, 2025 | 新闻发布 | EMC testing

Higher field strengths for critical test environments up to 18 GHz

Dec 09, 2025 | 新闻发布 | Test & measurement

Kyocera's innovative mmWave phased array antenna module (PAAM) generates multiple simultaneous beams in different directions and frequencies, enabling a wide range of sensing and communications applications. To optimize beam steering and directivity of their product, Kyocera utilizes CATR-based multi-reflector over-the-air (OTA) testing technology from Rohde & Schwarz.

May 23, 2023 | 新闻发布 | Test & measurement

The R&S SMW200A and R&S SMM100A vector signal generators and the R&S FSW and R&S FPS signal and spectrum analyzers from Rohde & Schwarz have been approved by Qualcomm for testing the Qualcomm® QRU100 5G RAN Platform – an O-RAN compliant solution with architecture flexibility designed to facilitate scalable and cost-effective 5G network deployments. OEMs providing RUs for Open RAN infrastructure adopting the Qualcomm QRU100 5G RAN Platform can be confident that these Rohde & Schwarz solutions meet the necessary sub-6 GHz test requirements for design verification and production.

Mar 04, 2025 | 新闻发布 | Wireless communications

Rohde & Schwarz and Pegatron 5G present a test setup optimized for O-RU production testing. The demonstration at Mobile World Congress 2025 in Barcelona is based on the PVT360A performance vector tester from Rohde & Schwarz characterizing the Pegatron 5G PR1450 O-RU. It shows the flexible adaptability of the PVT360A to a variety of setups – all in a small form factor. The performance vector tester is now available with a new high-power option, also showcased at MWC 2025.

Dec 04, 2023 | 新闻发布 | Wireless communications

The R&S TS8991 over-the-air (OTA) test system from Rohde & Schwarz is the first to be approved by CTIA Certification for testing 5G A-GNSS antenna performance. This solution measures the performance of the global navigation satellite system (GNSS) receiver in a wireless device. This is critical because Assisted-GNSS is used for E911 emergency calls over 5G.

Nov 20, 2025 | 新闻发布 | Aerospace and defense

Rohde & Schwarz and SRC, Inc. today announced the first delivery of the RSGEN™, an electronic warfare (EW) environmental signal generation system, to a major DoD test facility. This delivery marks a milestone in the companies’ strategic partnership, bringing together their expertise to advance EW test, evaluation and training capabilities for the US military.

Mar 26, 2024 | 新闻发布 | Test & measurement

Embedded systems are the foundation of today’s electronic devices, spanning sectors as diverse as consumer electronics, telecommunications, industrial, medical, automotive and aerospace applications. Ensuring seamless operation is critical, which means that engineers encounter complex challenges as they design increasingly compact embedded systems and align them with today’s requirements for efficiency, safety, reliability and interoperability. Rohde & Schwarz offers comprehensive test and measurement solutions to meet these challenges and will present its highlights at the embedded world Exhibition & Conference 2024 in Nuremberg, Germany.

Nov 12, 2025 | 在线新闻 | Test & measurement

The new R&S NRP-Z47 power sensor module from Rohde & Schwarz turns an R&S FSMR3000 measuring receiver into a precision power meter with a wide dynamic range from –23 dBm to +30 dBm. Providing frequency ranges up to 50 GHz this solution fits perfect for level calibration of generators and attenuators in radar systems.

Jun 19, 2023 | 新闻发布 | Wireless communications

At the i14y Lab, Rohde & Schwarz, VIAVI and Benetel combined their industry-leading capabilities to showcase their integrated, automated testing solution for the conformance testing of O-RAN radio units (O-RUs). This solution was used to test the commercial grade 4T4R RAN650 O-RU from Benetel according to O-RAN ALLIANCE and 3GPP specifications.

Aug 21, 2023 | 新闻发布 | Wireless communications

Rohde & Schwarz and MediaTek have partnered to successfully verify MediaTek’s 5G RedCap (reduced capability) test platform, as defined in 3GPP Release 17. RedCap will enable a new range of 5G standalone devices such as industrial sensors for 5G smart factories, logistics, edge-AI and always connected wearables. Rohde & Schwarz has tailored the R&S CMX500 OBT wireless communications tester to support RedCap and other Release 17 features.

Oct 31, 2023 | 新闻发布 | Test & measurement

With the all-new R&S MXO 5, Rohde & Schwarz continues to evolve its series of next-generation oscilloscopes, started with the successful R&S MXO 4 in 2022. The R&S MXO 5 is the company’s first eight-channel oscilloscope. It expands upon the industry-firsts pioneered by the R&S MXO 4 and will empower engineers to tackle even more demanding design challenges.

Jun 06, 2024 | 新闻发布 | Wireless communications

The United States Department of Commerce will provide funding to promote the deployment of open networks in the U.S. and abroad. Rohde & Schwarz and VIAVI offer joint test solutions to meet the needs of radio equipment manufacturers who plan to apply for the funding.

Dec 14, 2023 | 新闻发布 | Mobile network testing

First FCC-certified 5G-connected drone-in-a-box solution ushers in benefits of turnkey, operationally efficient, environmentally sustainable technology for U.S. industrial and public sectors. Collaboration utilizes R&S CMX500 radio communication tester from Rohde & Schwarz to proof standards compliance and reliability for mission-critical and business use cases.

Jul 03, 2023 | 新闻发布 | Wireless communications

Rohde & Schwarz has partnered with MediaTek to verify the first NTN NB-IoT protocol conformance test cases according to 3GPP 36.523-1 on MediaTek’s NTN IoT capable MT6825 chipset. This achievement sets the course for NTN device conformity approval – a significant step in bringing next-generation IoT devices based on non-terrestrial networks (NTN) to the market and enabling ubiquitous connectivity on land, at sea, and in the air.

Jun 28, 2023 | 新闻发布 | Wireless communications

Rohde & Schwarz in collaboration with Qualcomm Technologies, Inc., will conduct a comprehensive set of tests for NB-IoT over non-terrestrial networks (NTN) to accurately verify two-way internet of things (IoT) data across various operating modes using GSO and GEO constellations in line with the 3GPP Release 17. At the MWC Shanghai 2023, Rohde & Schwarz will hold a live demonstration of the test solution at the company’s booth with Qualcomm Technologies’ NTN Release 17 IoT chipsets.