Downloads

Provides the information required to prepare the instrument for use and start working.

English - 2025年11月11日

Calibrating Measuring Microphones and Sound Sources for Acoustic Measurements with Audio Analyzer R&S^® UPV

English - 2012年10月11日

This application note presents setting examples for all basic audio measurements to be performed immediately, using the R&S®UPP and R&S®UPV audio analyzers. For each setup, information is given on the type of measurement, the underlying standards, and on how to modify the graphic display results.

English - 2014年7月7日

Measurement of Play-only devices like MP3 Players with R&S Audio Analyzer UPV

English - 2007年6月28日

Rohde & Schwarz makes the simulation of complex coexistence scenarios simpler than ever before, thanks to a quick and easy setup of complex interference scenarios.

English - 2019年3月18日

Provides the information required to prepare the instrument for use and start working.

English - 2025年11月11日

Measurements on PCS1900 Base Stations According to J-STD-007

English - 2002年1月17日

This document provides a step-by-step guide on how to use a stand-alone R&S®CMW500 to take Rel-6 measurements on transmitter characteristics and execute performance tests according to TS 34.121 V9.7.0, clauses 5 and 10.

English - 2013年11月27日

Measurement of Spurious Emissions of GSM, DCS 1800 and PCS 1900 Transmitters with Spectrum Analyzers of the FSE Family

English - 2002年1月16日

This application note explains how to setup R&S®AdVISE to monitor the temperature of an EUT by using an infrared camera.

English - 2020年9月14日

Use the R&S®ZVA vector network analyzer and R&S®BBA150 broadband amplifier for accurate and reproducible results in minimum test time.

English - 2013年9月27日

Binary transfer with remote instruments, like the KPI-1200 Series of remote instruments. Learn about the various methods of remote binary transfer, like the KPI-1200, X-20 Series and KPI-2100 Series of instruments in this article.

English - 2022年3月31日

R&S^®CMW500 Digital IQ with CADENCE Emulator

English - 2011年6月30日

The SFU200A and SFE100 can be used to simulate the performance of many different types of receivers in the SFU200A and SFE100. This paper describes how to use these tools to simulate a correlated receiver using R&S®SFU.

English - 2012年10月19日

Measurement Setup for Phase Noise Test at Frequencies above 50 GHz with two external harmonic mixers in combination with a commercially available phase noise tester. Signal sources with frequencies up to 325 GHz can theoretically be measured with this setup.

English - 2018年2月5日

This application note belongs to a series of application notes which explains how to test EW receivers at RF in the lab with commercial, off-the-shelf signal generators and software.

English - 2021年3月23日

Test solution for multi-antenna EW receivers

English - 2021年12月22日

This Application Note presents Test & Measurement equipment for the broadcast and mobile radio sector and discusses some possible test setups.

English - 2011年12月8日

Guidelines for MIMO Test Setups – Part 2

English - 2009年10月14日

In this paper a rapid characterization of high speed digital channels using a multiport VNA is demonstrated.The VNA is a major tool in the field of communication and signal processing.

English - 2020年3月18日

Measurements on GSM Base Stations According to Rec. 11.20

English - 2002年1月16日

How to Run WCDMA BER/ BLER Tests Using R&S Vector Signal Generators

English - 2009年3月6日

This application note explains the fundamentals of using S-parameters and discusses some common applications in which S-parameter correction is useful.

English - 2012年7月26日

Generation and Analysis of ZigBee™ IEEE802.15.4 signals in the 2.4 GHz band

English - 2007年6月21日

This application note shows all necessary settings for performing Dual Receiver Measurement using the R&S®EMC32-K27 option via R&S® EMC32 Measurement Software.

English - 2017年9月28日

Describes how to set up the external preamplifier R&S HA-Z24E, how to read out the s-parameters using the provided software, and how to insert the preampifier in a measurement setup.

English - 2025年11月11日

The R&S®SMA100B offers outputs for the analog input signal of the ADC as well as the clock input signal in one single instrument - both with outstanding signal purity.

English - 2021年1月11日

This application note provides basic information about the concept of a group delay measurement with spectrum analyzers and signal generators, and how this method simplifies the test setup and improves the measurement speed

English - 2017年8月9日