文档及文章搜索

The Freerider backpack system generation 4 is a compact, lightweight solution for walk test and drive test campaigns. Supporting up to 12 test mobile phones and high-performance scanner measurements (including 5G millimeterwave and LTE 4x4 MIMO), it is ideal for network optimization, benchmarking and cellular network analysis.

R&S<sup>®</sup> Test Solutions 与 AWR<sup>®</sup> Visual System Simulator™ (VSS) 的连接

5月 20, 2010 | AN-No. 1MA174

All wireless devices must be tested for radiated spurious emissions (RSE) to verify compliance with national and international standards such as ITU, ETSI and FCC. The configuration required is similar to an EMI measurement setup, with the additional challenging task of measuring the low level spurious emissions in presence of the carrier frequency of a wireless device. The R&S®TS8996 RSE test system handles these tasks with a single setup and covers all relevant carrier frequencies and bandwidths used in wireless communications.

Wireless Battery Management System manufacturing test solution from Rohde & Schwarz

In the satellite sector, components, subsystems and entire satellites must be qualified in a thermal vacuum chamber before they can be used in space. This qualification proves that equipment can not only survive but also function in the harsh conditions encountered during launch and in space.

Oct 05, 2022

R&S®SFU Broadcast Test System - Specifications

R&S SFU Broadcast Test System - Product Brochure

上一张 下一张

R&S®SFU Broadcast Test System - Product Brochure

R&S®SFU Broadcast Test System - Product Brochure DE

HM8000 Modular System

Open test platform for high-performance ATE applications

R&S®TS8970 WiMAX™ Radio Certification Test System - Data Sheet

Ultra-compact, optimized for highest yield

R&S®FSMU-W WCDMA base station test system - Product Brochure

5G antenna characterization with a small footprint

R&S TS-ITS100 RF Conformance Test System - Product Brochure

上一张 下一张

R&S®TS-ITS100 RF Conformance Test System - Product Brochure

R&S®TS-ITS100 RF Conformance Test System - Product Brochure DE

The R&S TS‑LBS is a test system for testing GNSS and network-based location based services (LBS).

Solution brief | 解决方案简介

Solution brief | 解决方案简介

This application note describes a technique to perform a calibrated noise power measurement (P_hot) with spectrum analyzers and noise sources.

May 31, 2022 | AN-No. 1EF113

Nov 20, 2019 | 新闻发布

Rohde & Schwarz has entered an agreement with Qualcomm Technologies, Inc., a wholly owned subsidiary of Qualcomm Incorporated, for the use of their Interface Control Document for 5G as an authorized licensee to develop test equipment based on Qualcomm® Snapdragon™ X55 5G Modem-RF System.

Test and Communications Antennas for the R&S TS8991 OTA Performance Test System - Specifications

This user manual Introduces the R&S®CompactTSVP and describes how to set up and operate the product.

Nov 23, 2020 | 新闻发布

As part of an interoperability test, Rohde & Schwarz successfully demonstrated various operational use cases with SOVERON D for government customers

Apr 27, 2022 | 新闻发布

IT security expert Rohde & Schwarz Cybersecurity has teamed up with roda computer, Panasonic's sales partner in Germany, to offer a new IT security package for customers in the security and defense sector.

1MA21 1MA21

2月 18, 2011 | AN-No. 1MA21

Malware Protection Windows 10

Sep 23, 2016 | AN-No. 1EF96

Rohde & Schwarz recognizes the potential risk of computer virus infection when con-necting Windows®-based test instrumenta-tion to other computers via local area net-works (LANs), or using removable storage devices.

Jan 27, 2015 | AN-No. 1DC01

R&S TS-DVBH Test System - Data Sheet

上一张 下一张

R&S®TS-DVBH Test System - Data Sheet

R&S®TS-DVBH Test System - Data Sheet DE

Software tool for fast and repeatable optimization of signal analyzer RF front-end settings

The signal conditioning in the RF front-end of signal analyzers is crucial to achieve the best performance with respect to image-suppression, noise-floor, dynamic range and other RF-key parameters.Precise signal levelling is especially important for complex measurements like Error-Vector-Magnitude (EVM). To minimize the measurement uncertainty from test system contributions over a wide range of different levels, the RF front-end needs to be adapted continuously according to the signal characteristics, signal power and frequency - ideally using an automatic levelling algorithm.This document describes the approach of a waveform specific, on-site characterization of the signal analyzer: For each waveform and frequency of interest, the instrument is evaluated in a first step. With this additional data, a fast and repeatable auto-levelling can be performed during the actual measurement.

Jan 24, 2022 | AN-No. 1EF111

R&S®TS6030 I-STE Test System for M3xR - Data Sheet

Dec 21, 2022 | 新闻发布

In research on future-proof cryptographic methods, the dtec.bw-funded MuQuaNet (Munich Quantum Network) project has reached an important milestone toward highly secure quantum-resistant networks.