19 结果
R&S®VISA 是一个标准化软件库，支持通过多种接口和从电脑应用中检测到的各类联网测试与测量仪器进行快速通信。R&S®VISA 还包括一个跟踪工具，可同步监控多个应用和测试与测量仪器之间的通信，并支持借助高效滤波器进行针对性分析。
5月 26, 2020 | AN-No. 1DC02
1MA196 1MA196, Forum, 应用程序, 仪器, 远程, 控制, Python, 脚本, R&S Forum, RS Forum, R&SForum, RSForum 使用 R&S®Forum 应用程序实现仪器远程控制 使用 R&S®Forum 应用程序实现仪器远程控制 1MA196 1MA196, Forum, 应用程序, 仪器, 远程, 控制, Python, 脚本, R&S Forum, RS Forum, R&SForum, RSForum 使用 R&S®Forum 应用程序实现仪器远程控制
6月 28, 2018 | AN-No. 1MA196
本应用指南概述了两种不同方法以通过 MathWorks MATLAB 远程控制罗德与施瓦茨仪器：第一种方法是使用 VISA 连接和直接 SCPI 命令。第二种方法是利用罗德与施瓦茨 VXI Plug & Play 仪器驱动程序和 MATLAB Instrument Control Toolbox。
6月 12, 2017 | AN-No. 1MA171
5G 网络将需要提高容量和灵活性，同时降低系统运营费用。虚拟化和大规模 MIMO 是两种新兴技术，可应对提高容量和能源效率方面的需求。本白皮书概述了满足当前和未来天线验证需求的测试解决方案，包括应用大规模 MIMO 天线技术的传导和空口 (OTA) 测试方法。本白皮书是对罗德与施瓦茨 白皮书 (1MA276) 的补充，介绍了波束成形天线的基本理论，探讨了辐射方向图的计算方法，并展示了小型线性阵列的大量模拟结果和部分实际测量结果。
11月 11, 2016 | AN-No. 1MA286
Welcome to this introductory video show about the R&S® ZVA family of network analyzers. Network analysis is sometimes considered to be cumbersome and difficult to understand, a very offputting reputation for newcomers to network analyzers. To help you look at network analyzers in a different light, we have created this video series. We have intentionally refrained from explaining any theory in depth. Rather, we want to show you how to operate our analyzers for simple and useful applications. As well as just watching this video show, you can also use it as a guide and try yourself. All the operational steps shown only require a standard RF power amplifier which should be available in almost every lab. So, before we get properly started, we hope you enjoy this video show and much success in becoming familiar with network analysis in general, and our R&S products in particular.
Feb 13, 2014 | AN-No. 1MA50
此应用指南描述了如何直接通过矢量网络分析仪 (VNA) 或频谱分析仪 (SA) 中的 R&S®OSP 开放式切换及控制平台远程控制射频及数字 I/O 信号的转换。 R&S®ZVA、R&S®ZVB、R&S®ZNB、R&S®FSW 及R&S®FSV 系列均包括在内。 此应用指南首先描述了要求及设置程序。 此应用指南描述了如何安装软件以及如何设置系统，从而最大程度地提高灵活性及可用性。 此应用指南描述了如何校准整体配置，最后还提供了一些实例。 附录 5.4 以 VNA 为例解释了转换，并指示了以相同方式使用 SA 有何不同。
12月 06, 2013 | AN-No. 1MA226
该应用指南描述了使用 R&S®ZVA 矢量网络分析仪、在脉冲条件下测试 S 参数，以及将带有脉冲模块化选件的 ZVAX24 扩展单元或者带有脉冲调制器的 R&S®SMF 信号发生器作为信号源。此外，该应用指南中还加入了针对需要高驱动功率的应用的恒功率电平校准，以便对被测设备 (DUT) 执行测试与测量。 LDMOS S 频段雷达功率晶体管作为 DUT。 R&S®ZVA 的脉冲轮廓模式用于分析与时间有关的 DUT 行为。
4月 11, 2013 | AN-No. 1MA126
The aim of this application note is to provide information regarding Rohde & Schwarz instrument drivers. This paper shall help application engineers and software developers to easily get an understanding of advanced techniques to develop test and measurement (T&M) applications by utilizing Rohde & Schwarz instrument drivers. Furthermore the nomenclature used for Rohde & Schwarz instrument drivers will be explained.
Jan 01, 2013 | AN-No. 1MA153
The use of Rohde & Schwarz device drivers under VEE software is not complicated. However, a number of factors are involved, the errors that occur are often difficult to diagnose. This application provides easy and detailed support for installation and troubleshooting using National Instruments or Agilent GPIB boards.
Dec 20, 2012 | AN-No. 1MA035
This application note explains how to create screenshots of Rohde & Schwarz instruments using instrument drivers. The presented examples are written in C (LabWindows/CVI), C# programming language and LabVIEW. The examples are available at the instrument driver download site.
Dec 11, 2009 | AN-No. 1MA160
Application note 1MA25 has been replaced by application note .
Aug 28, 2009 | AN-No. 1MA25
This document describes how the advanced calibration techniques of the ZVA Vector Network Analyzers can solve the challenges of measuring the S-Parameters on impedance matching devices. The document describes the concept and setup required to perform the calibration of the ZVA and making the measurement. The procedure described in this application note applies to the ZVB and ZVT Vector Network Analyzers as well.
May 06, 2009 | AN-No. 1EZ59
Balanced RF components are advantageous compared to traditional single-ended components, since they cause less EMI, and are less susceptible to EMI. This application note describes the fundamental concepts of differential and common mode signals and of mixed-mode parameters, which are essential for balanced components. Techniques for the measurement of mixed-mode parameters are presented. Examples show the features implemented in the ZVB for balanced device measurement.
Sep 20, 2004 | AN-No. 1EZ53
该应用指南描述了两种换算程序： 1.： 功率单元计算器功率、dBm、dBmV 以及 Volts @ 50 W 2.： VSWR 计算器反射、VSWR、回波损耗以及功率反射，反射与适配不确定性。
7月 03, 1998 | AN-No. 1MA12