34 结果
Describes the software and the test modules.
带 R&S CMW 和 R&S CMWrun 的罗德与施瓦茨蓝牙 RF 测试解决方案可与蓝牙 RF 测试套件紧密结合。本文描述这些测试和所需配置的常见步骤。
5月 04, 2015 | AN-No. 1MA261
Automated tests with R&S®CMWrun and R&S®SMBVB-K361
2月 26, 2025 | 新闻发布
罗德与施瓦茨和u-blox合作验证新模块,以符合中国新GNSS汽车标准GB/T 45086.1-2024罗德与施瓦茨(以下简称“R&S”)和全球领先的GNSS模块供应商u-blox合作,成功验证了u-blox最新的汽车GNSS模块。该验证基于R&S SMBV100B GNSS模拟器的自动化测试解决方案,符合最新发布的中国GB/T汽车车载GNSS定位系统测试要求。该前沿解决方案已亮相MWC 2025大会。
根据中国国家 GNSS 测试标准 (GB/T 45086.1-2024) 使用 R&S®CMWrun 序列控制软件和 R&S®SMBV100B 矢量信号发生器实现自动化测试
2月 20, 2025
此应用指南描述了如何使用 R&S®CMW500 无线电通信测试仪以及 R&S®VTE 视频分析仪来确定 LTE 移动设备流式传输的视频的质量。
9月 08, 2014 | AN-No. 1MA253
介绍探头及其用途。
此应用指南简要说明 ERA-GLONASS 的支持技术,并展示使用 R&S®CMW500 射频测试仪和 R&S®SMBV100A 矢量信号发生器的 ERA-GLONASS 一致性测试。
1月 24, 2018 | AN-No. 1MA251
The K364 software option based on CMWrun software automatically configures all the instruments, controls all the system and runs the test procedure, it can also support flexible parameter setting and user-defined test cases. This solution has already been validated by leading industry players, such as GNSS chipset manufacturers, module providers, Tier 1s, and certification labs.
Feb 12, 2018 | 新闻发布
Validate the performance of eCall modules with new GNSS performance test solution from Rohde & SchwarzRohde & Schwarz presents a new GNSS performance test solution to validate the performance of eCall modules. A new option for the R&S SMBV100A vector signal generator delivers standard-compliant, fully automated performance tests for the GNSS receiver integrated in the eCall module.
罗德与施瓦茨提出一种可定制的 GNSS 接收机测试解决方案,旨在确保此类接收机在防止相邻频段的(合法)干扰方面具有一定的弹性。
7月 18, 2017
May 02, 2017 | 新闻发布
Rohde & Schwarz T&M equipment adopted by Renesas for R&D, conformance test and production of IEEE 802.11p devicesRohde & Schwarz T&M equipment enables semiconductor manufacturer Renesas to provide first class communications solutions for the 11p market.
本应用指南使用罗德与施瓦茨测试解决方案,介绍了如何根据 Bluetooth 5.1 射频测试规范执行 Bluetooth LE 5.1 测向射频测试。
10月 30, 2019 | AN-No. GFM327
本文描述了用于测试蓝牙 Low Energy 设备的直接测试模式机制,并说明如何建立直接测试模式连接。 R&S CMW 使用 USB 端口进行直接测试模式连接,而测试设备 (EUT) 可为此用途提供 USB 端口、串行端口或双线 UART 接口。 为 EUT 安装或分配适当驱动程序是对 R&S CMW 的主要配置任务。对于带 USB 端口的 EUT,R&S CMW 提供需要分配给连接 EUT 的蓝牙 Low Energy USB 驱动程序。
12月 14, 2016 | AN-No. 1C105
Bluetooth® testing with Rohde & Schwarz devices