R&S®NRPM OTA 功率测量解决方案

R&S®NRPM OTA 功率测量解决方案
打开灯箱
R&S®NRPM OTA 功率测量解决方案
打开灯箱
R&S®NRPM OTA 功率测量解决方案
打开灯箱
R&S®NRPM OTA 功率测量解决方案
打开灯箱
R&S®NRPM OTA 功率测量解决方案
打开灯箱
R&S®NRPM OTA 功率测量解决方案
打开灯箱
R&S®NRPM OTA 功率测量解决方案
打开灯箱
R&S®NRPM OTA 功率测量解决方案,应用图像 R&S®NRPM OTA 功率测量解决方案,应用图像 R&S®NRPM OTA 功率测量解决方案,前视图 R&S®NRPM OTA 功率测量解决方案,前视图 R&S®NRPM OTA 功率测量解决方案,高前视图 R&S®NRPM OTA 功率测量解决方案,前视图 R&S®NRPM OTA 功率测量解决方案,前视图

主要特点

  • 频率范围介于 18 GHz 至 90 GHz
  • 非常快速的接收列表模式
  • 适用于 5G、WLAN IEEE 802.11ad、IEEE 802.11ay 和汽车电子雷达
  • 充分校准的天线模块,带集成式二极管检波器
  • 可根据客户要求扩展

专为高精度空口 (OTA) 功率测量而设计

R&S®NRPM 是充分校准且可单独扩展的 OTA 功率测量解决方案,适用于台式应用或电波暗室。它的频率范围介于 18 GHz 至 90 GHz,非常适用于针对 5G、WLAN IEEE 802.11ad 和 IEEE 802.11ay 的空口 (OTA) 波束成形验证,以及发射天线输出功率校准。

特性和优点

指定的系统不确定度

充分校准的 OTA 功率测量系统,具有指定的系统不确定度

在传统的 OTA 系统中,与频率相关的天线增益、天线方向图和不匹配的射频组件会造成测量不确定。R&S®NRPM 解决方案直接在天线上测量功率,无需任何额外的射频组件,因此可避免这个问题。此外,天线增益、天线方向图和二极管检波器可以同时进行校准。用户不必进行复杂的系统校准。

OTA 功率测量系统
打开灯箱

OTA 功率测量系统

低反射天线模块

雷达散射截面积小,避免干扰反射

R&S®NRPM-A90/-A90D 天线模块的雷达散射截面积非常小,通常不足 –26 dB/sm,比典型喇叭天线的横截面小 15 dB/sm 左右。由于几乎没有反射,因此非常适用于屏蔽环境。

R&S®NRPM-A90 低反射天线模块
打开灯箱

R&S®NRPM-A90 低反射天线模块

高灵敏度

R&S®NRPM OTA 功率测量解决方案使用直接集成到天线的高度灵敏的二极管检波器

R&S®NRPM-A90 和 R&S®NRPM-A90D 天线模块能够测量低至 -76 dBm 的功率。例如,可以在距离 1 m 时定位发射功率为 -10 dBm 的被测设备,同时能够精确测定天线模块的接收功率。

OTA 功率测量解决方案,台式
打开灯箱

OTA 功率测量解决方案,台式

OTA 接收机测试系统校准

要测试被测设备接收机,需要准确知道被测设备端通过空中传输发射的功率。要校准此测量装置,将 R&S®NRPM-A90 天线模块置于被测设备侧,以便校准信号发生器的发射功率。使用 R&S®NRPM-A90/A90D 天线模块完成校准,然后将天线模块替换为被测设备。这样能准确检测被测设备的接收功率。

OTA 接收机测试系统校准
打开灯箱

OTA 接收机测试系统校准

发射机波束成形验证

需要使用多个 R&S®NRPM-A90/A90D 天线模块测试波束成形功能。如果天线波束指向特定的天线模块,则该模块显示所有天线的最大功率。使用三个排列在同一个平面的天线模块验证水平面的波束控制是否功能正常。要测试垂直波束成形,必须将 R&S®NRPM-A90/A90D 天线模块排列在至少两个水平面上。

发射机波束成形验证
打开灯箱

发射机波束成形验证

规格
R&S®NRPM-A90 单极化天线
频率范围 18 GHz 至 90 GHz
功率测量范围(频率相关) 连续平均 -76 dBm 至 -19 dBm
迹线 -63 dBm 至 -19 dBm
上升/下降时间 2.2 μs
视频带宽 220 kHz
测量不确定度
18 GHz 至 24 GHz 绝对值 0.68 dB 至 0.81 dB
相对值 0.05 dB 至 0.09 dB
> 24 GHz 至 35 GHz 绝对值 0.49 dB 至 0.66 dB
相对值 0.05 dB 至 0.09 dB
> 35 GHz 至 57 GHz 绝对值 0.50 dB 至 0.72 dB
相对值 0.05 dB 至 0.09 dB
> 57 GHz 至 71 GHz 绝对值 0.58 dB 至 0.83 dB
相对值 0.05 dB 至 0.09 dB
> 71 GHz 至 81 GHz 绝对值 0.61 dB 至 0.91 dB
相对值 0.05 dB 至 0.09 dB
> 81 GHz 至 90 GHz 绝对值 0.69 dB 至 0.97 dB
相对值 0.05 dB 至 0.09 dB
R&S®NRPM-A90D 双极化天线
频率范围 18 GHz 至 90 GHz
功率测量范围(频率相关) 连续平均 -76 dBm 至 -19 dBm
迹线 -63 dBm 至 -19 dBm
上升/下降时间 2.2 μs
视频带宽 220 kHz
测量不确定度(测量距离:1 m)
18 GHz 至 24 GHz 绝对值 0.73 dB 至 0.85 dB
相对值 0.05 dB 至 0.09 dB
> 24 GHz 至 35 GHz 绝对值 0.55 dB 至 0.71 dB
相对值 0.05 dB 至 0.09 dB
> 35 GHz 至 57 GHz 绝对值 0.59 dB 至 0.78 dB
相对值 0.05 dB 至 0.09 dB
> 57 GHz 至 71 GHz 绝对值 0.68 dB 至 0.90 dB
相对值 0.05 dB 至 0.09 dB
> 71 GHz 至 81 GHz 绝对值 0.72 dB 至 0.99 dB
相对值 0.05 dB 至 0.09 dB
> 81 GHz 至 90 GHz 绝对值 0.87 dB 至 1.10 dB
相对值 0.05 dB 至 0.09 dB

可用选项

天线模块
产品
描述
R&S®NRPM-A90

订单号码 1426.7760.02

描述

单极化天线模块

充分校准的低反射单极化维瓦第天线,带集成式二极管检波器,适用于功率测量。

R&S®NRPM-A90D

订单号码 1426.7777.02

描述

双极化天线模块

两个带集成式二极管检波器的低反射单极化维瓦第天线,精确排列成直角。这支持两个极化方向的测量。

探头模块
产品
描述
R&S®NRPM3

订单号码 1425.8563.02

描述

三通道探头模块

R&S®NRPM3N

订单号码 1425.8592.02

描述

Three Channel LAN Sensor Module

适用于射频屏蔽测试箱的接口
产品
描述
R&S®NRPM-ZD3

订单号码 1425.8786.02

描述

已滤波的线缆馈入模块

R&S®NRPM-ZKD3

订单号码 1436.2984.02

描述

Interface cable

用于台式应用的接口
产品
描述
R&S®NRPM-Z3

订单号码 1426.7602.02

描述

接口模块

R&S®NRPM-Z3 直接插入 R&S®NRPM3 三通道探头模块,并且至多可托管三个 R&S®NRPM-A90 天线模块,无需额外使用电缆。

通用附件
产品
描述
R&S®NRP-ZKU

订单号码 1419.0658.02

描述

USB-A 接口电缆,长度:0.75 m

R&S®NRP-ZKU

订单号码 1419.0658.03

描述

USB-A 接口电缆,长度:1.5 m

R&S®NRP-ZKU

订单号码 1419.0658.04

描述

USB-A 接口电缆,长度:3 m

R&S®NRP-ZKU

订单号码 1419.0658.05

描述

USB-A 接口电缆,长度:5 m

R&S®NRP-ZK6

订单号码 1419.0664.02

描述

六极接口电缆,长度:1.5 m

R&S®NRP-ZK6

订单号码 1419.0664.03

描述

六极接口电缆,长度:3 m

R&S®NRP-ZK6

订单号码 1419.0664.04

描述

六极接口电缆,长度:5 m

R&S®NRP-Z5

订单号码 1146.7740.02

描述

USB 探头集线器

R&S®NRP-Z5 可最多托管四个 R&S®NRPxxS(N)、R&S®NRPxxT(N)、R&S®NRPxxA(N) 或 R&S®NRP-Z 探头。专业的触发解决方案支持所有连接探头的同步内外部触发。

R&S®NRPM-ZKT

订单号码 1425.8857.02

描述

触发电缆

文件
产品
描述
R&S®DCV-1

订单号码 0240.2187.06

描述

校准值文件

R&S®DCV-ZP

订单号码 1173.6506.02

描述

校准值文件打印输出

Related videos

了解 OTA 功率测量

本视频展示了空口 (OTA) 功率测量技术简介,解释了这种测量方法和传统传导功率测量的不同之处。

5月 18, 2020

使用 R&S®NRPM

本短视频简要介绍了 R&S®NRPM 空口 (OTA) 功率测量系统。

5月 18, 2020

请求信息

如果您有任何疑问或需要了解更多信息,请填写此表格,我们会尽快回复您。

推广许可

你的申请已提交,我们稍后会联系您。
An error is occurred, please try it again later.
大体信息,法律信息

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.