1015 结果
Convenient management of TEMPEST measurements and reporting. The R&S®ELEMI-T test software is used to measure and analyze compromising emanations. It creates an environment that makes it easier to find, investigate, measure, record and report these emanations.
R&S TS-PSU Power Supply/Load Module - Product Brochure
The five modular R&S®NRPC calibration kits are used to calibrate R&S®NRP power sensors, as well as other makes, to a very high level of accuracy. Following calibration, the sensors are within the specified calibration uncertainties and usually remain below these uncertainties.
The R&S®DDF200M digital direction finder represents the latest generation of traffic control direction finders. Radio direction finding for maritime traffic control is performed simultaneously on multiple frequency channels using only one direction finder.
The measurement technique used by a PIM analyzer is CW or low duty cycle. The only traceable device available to independently validate a PIM analyzer’s measurement accuracy in the field is a PIM standard.
Mar 20, 2025 | 新闻发布
Rohde & Schwarz Australia takes center stage at Avalon 2025 with comprehensive ATC and airbase security solutionsRohde & Schwarz Australia will showcase its comprehensive range of air traffic control, air defense, and airbase security solutions at the Avalon Australian International Airshow 2025, highlighting its expertise in secure and reliable voice communications, counter-drone capabilities, and spectrum monitoring and direction-finding technologies.
Nov 23, 2020 | 新闻发布
Rohde & Schwarz enables Optus to deliver optimal 5G quality of experience with mobile network testing solutionOptus has chosen to continue their mobile network benchmarking efforts with test equipment from Rohde & Schwarz. Through a competitive tender, Rohde & Schwarz has been selected by Optus to replace the existing 4G systems and to provide multiple 5G mobile benchmarking systems. These will measure end-to-end performance of mobile networks, in voice, video and data modes as well as for signal coverage. These measurements will enable continuous improvement by Optus to the quality of experience seen by their subscribers.
Oct 19, 2020 | 新闻发布
Rohde & Schwarz first to bring 1 GHz analysis bandwidth to a mid-range signal and spectrum analyzer – ideal for 5G NRTo analyze wideband signals for 5G NR and other future wireless standards, a wide analysis bandwidth is key. To meet this testing need also with a limited budget, Rohde & Schwarz brings an exceptional internal analysis bandwidth of 1 GHz to its mid-range R&S FSVA3000 signal and spectrum analyzer.
Oct 13, 2020 | 新闻发布
Rohde & Schwarz announces awards success with touch-operated analyzerThe R&S ZNA vector network analyzer is named the Test, Measurement & Inspection product of the year at the Electronics Industry Awards.
Nov 15, 2022 | 新闻发布
Enhanced R&S NRPxxP RF wideband power measurement sensor family with maximum frequency of 50 GHzUpgraded Rohde & Schwarz compact standalone wideband sensors for power measurements make up the R&S NRPxxP family. The R&S NRP50P is the latest model and engineers can now measure power levels from –60 dBm to +20 dBm at frequencies from 50 MHz to 50 GHz. The sensor is ideal for installing, maintaining and monitoring wireless communications systems.
ARDRONIS Wi-Fi is the solution in the ARDRONIS family for detecting and mitigation of drones and remote controls using wireless LAN (ISM bands 2.4 GHz, 5.,2 GHz & 5.8GHz).
The Spanish Ministry of Defense (MoD) has ordered the construction of five new F-110 Bonifaz-class multi-mission frigates by Navantia. They are specialized in anti-submarine warfare and will be used for force and fleet protection, maritime security, joint and combined missions and to prevent conventional asymmetric threats.
R&S PowerTSVP Industrial High-Power and Switching Application Chassis - Product Brochure
The R&S®SZM family of frequency multipliers combines easy handling and precise output levels in the frequency range from 50 GHz to 170 GHz. It can be used in diverse applications, e.g. in the automotive sector with distance radars, in astronomy with sophisticated telescopes and in radar interferometry for analyzing the earth’s surface.
R&S®FSWP Dynamic noise figure measurements - Application Card
This article describes a mobile network testing approach for 5G new radio (NR) using a passive scanner, which measures synchronization signal (SS)/physical broadcast channel (PBCH) blocks, or SSBs, broadcast from 5G NR base stations.
Thanks to their extremely high accuracy and fast load recovery time, the R&S®NGU source measure units (SMU) are perfect for challenging applications. A special ammeter design is used to precisely measure current drains from nA to A in one pass – no need to make multiple measurement sweeps.
R&S Fxx-K30 Measure noise figure above 110GHz - Application Card
R&S TS-ICT In-Circuit-Test Option for R&S®TSVP - Product Brochure
Feedthroughs are used to run cables from the outside into a shielded environment such as an RF shielded box or an OTA chamber. This is done to maintain the shielding effectiveness of a given environment and prevent leakage of RF radiation into or out of the chamber.
The R&S®NRPC-LS enables linearity calibration of RF power sensors. The calibration frequency of 1 GHz is optimized for reliable verification of RF power detectors using various technologies. The R&S®NRPC-LS is also suitable for linearity calibration of spectrum analyzers and network analyzers.
The Hobart Class guided missile destroyers (DDG) of the Royal Australian Navy (RAN) provide air defense for accompanying ships in addition to land forces and infrastructure in coastal areas, and for self-protection against missiles and aircraft.
This paper, originally printed in the Microwave Journal, investigates significant aspects of mechanisms to improve amplifier energy efficiency, illustrating the effectiveness of each method, and the possibilities for further improvements.
R&S ZNC Vector Network Analyzer - Product Brochure
We will compare different device types such as smartphones, industry modules with various chipsets included that are used for network testing. private networks, Private 5G networks, 5g networks Webinar: URLLC - How reliable are private 5G networks today?
Jan 07, 2020 | 新闻发布
AVL adds Rohde & Schwarz GNSS stimulation to vehicle test environmentGNSS signals (for example GPS signals) are of major importance for positioning and tracking, orientation and safety-related information, such as congestion, in road traffic. A collaboration between AVL and Rohde & Schwarz, two of the world’s leading providers of measuring and automotive testing systems, now permits the reproduction of realistic GNSS reception conditions for testbed vehicle testing. As a result, users can reliably test all aspects of GNSS-based vehicle positioning – a core functionality of autonomous vehicles.
May 11, 2022 | 新闻发布
SWR to showcase live 5G Broadcast distribution of the Eurovision Song Contest in Stuttgart, powered by Rohde & Schwarz and QualcommSWR to showcase live 5G Broadcast distribution of the Eurovision Song Contest in Stuttgart, powered by Rohde & Schwarz and Qualcomm
Feb 22, 2022 | 新闻发布
German Federal Office for Information Security (BSI) publishes IT-Grundschutz-Compendium 2022The IT-Grundschutz-Compendium provides companies, public authorities and critical infrastructure facilities with a detailed guide on how to protect themselves.
Sep 13, 2023 | 新闻发布
Belgian Air Force operates R&S M4ACS from Rohde & SchwarzTrusted end-to-end mission control communications system (R&S M4ACS) from Rohde & Schwarz meets the highest security requirements for the Belgian Ministry of Defense command center.
The R&S®QPS is a state-of-the-art millimeterwave security scanner that automatically detects potentially dangerous items carried on the body or in clothing. The scanner is used for security checks at airports, for property protection, for security at public events with a high threat potential and for access control at security-related facilities.