文档及文章搜索

Historically, OEMs have used bulky, imprecise, and noisy mechanical reflectors to conduct EOL radar alignment and calibration.

Nonlinear applications using Rohde & Schwarz vector network analyzers - Product Flyer

This session outlines 2D nanoelectronics roadmap, addressing integration challenges, contact engineering, reliability issues, and progress toward a universal semiconductor technology platform. This session outlines 2D nanoelectronics roadmap, addressing integration challenges, contact engineering, reliability issues, and progress toward a universal semiconductor technology platform.

Summarize linearity and efficiency requirements for power amplifiers used in emerging broadband applications. Introduce a workflow typing together measurements and simulation to address issues. Summarize linearity and efficiency requirements for power amplifiers used in emerging broadband applications.

Oct 30, 2024 | 新闻发布

Rohde & Schwarz has closed the fiscal year successfully in a market environment that remains highly dynamic.

The R&S®FSWP phase noise analyzer and VCO tester is a high-end instrument that accurately analyzes noise in key radar and communications system components.

May 16, 2025

Neural Receiver with 5G NR Multiple MIMO Signals Using Machine Learning (ML) powered by Artificial Intelligence for signal processing tasks in wireless communication really is beginning to move from theory to practic

Learn more about two different setups for testing AI/ML CSI compression, both using the R&S®CMX500 base station emulator.

Using a test setup from Rohde & Schwarz and VIAVI Solutions run tests conforming to O-RAN ALLIANCE specifications on an Analog Devices 8T8R radio reference platform.

I want to set the acquisition mode to Average + HR using SCPI commands. But I can not find the right command in the manual.

and Impedance Analyzers from Rohde & Schwarz are ideal for measuring impedance at a fixed frequency as well as for determining the best operating point for the component under test The LCR Meters and Impedance Analyzers from Rohde & Schwarz are ideal for measuring impedance at a fixed frequency as well as for determining the best operating point for the component under test Impedance Measurements using

How can I add a attenuation table to my cable, used in my measurement setup?

Application Note Peak and Mean Power measurements on wideband FMCW radar signals

Jun 28, 2019 | AN-No. 1EF107

This application note provides practical hints to accurately characterize and de-embed these lead-in and lead-out structures with R&S Vector Network Analyzers ZNA, ZNB, ZNBT and ZND.

Sep 19, 2022 | AN-No. 1SL367

Diamond Light Source makes the invisible visible with a little help from Rohde & Schwarz - Case Study

Sep 16, 2020 | 新闻发布

R&S ATC-SBC uses state-of-the-art technology to protect voice over IP (VoIP) networks. SBCs are commonly used in networks as border elements between two security domains to provide protection. What makes R&S ATC-SBC unique is that it is the only solution on the market that supports the ED-137A , B and C international standards.

Jun 13, 2024 | 新闻发布

Rohde & Schwarz is advancing its pioneering sub-THz research in the D-Band and has reached important milestones. In collaboration with the Berkeley Wireless Research Center (BWRC), the test and measurement expert has successfully characterized a TX/RX multi-antenna chip (CHARM) operating at up to 140 GHz, using their D-Band over-the-air (OTA) test chamber. Academia and industry leaders agree that the 110 GHz to 170 GHz frequency range, known as D-Band, is critical for beyond 5G and 6G mobile communications and future automotive radar applications.

A sinus signal with i.e. 10 V peak-peak, frequency 1 MHz is applied. If I choose a vertical scale which is too small the peaks of the waveform are not displayed as they are out of range. Now I activate the digital filter in the “Vertical” menu à “Channel”. The frequency of the filter is also set to 1 MHz. Now even at very small vertical scales (i.e. 50 mV/div) the waveform is displayed completely, see screenshot. But the amplitude can not be correct. What goes wrong here?

R&S®Atomix LT - Fact Sheet

Animated avatar calls using augmented reality are one of the key application areas for 5G-Advanced. The R&S CMX500 radio communication tester empowers network operators to evaluate XR-based applications and services in a controlled environment, ensuring optimal performance and quality before mainstream deployment.

MIPI D-PHY is a low-power, cost-effective physical layer interface, essential in mobile devices and advanced technology systems. It's a high-speed, source-synchronous interface used in smartphone cameras, smartwatch displays, drones, in-car entertainment, automobile cameras, and radar sensors. This application note explores MIPI D-PHY's features, functionality, and testing practices for device compliance, addressing common issues. It highlights Rohde & Schwarz's equipment for ensuring compatibility and solving issues with MIPI D-PHY, aligned with MIPI D-PHY specification version 2.5.Developed by the MIPI Alliance, D-PHY connects cameras and displays to a host processor via CSI-2 or DSI protocols. It features a master-slave, asymmetrical design for reduced link complexity. Key aspects include a unidirectional clock, optional data signal directions, different data rates for half-duplex operation, point-to-point communication, and high-speed (HS) and low-power (LP) modes for data transfer and battery preservation. In HS mode, D-PHY uses differential signaling with specific impedance, while in LP mode, it operates in a single-ended manner with high impedance termination.The application note from Rohde & Schwarz provides insights into characterizing and debugging MIPI D-PHY, offering conformance verification with MIPI Alliance standards and protocol decoding options.

Jan 31, 2024 | AN-No. 1SL410

Venice 4K, Clipster, SpycerBox Ultra TL, Headend AVHE100, Sky

Learn how the R&S®SFI100A vector signal generator can be used with the NRP Power Sensors to realize close loop power control at the output of a device under test such as a power amplifier. Learn how the R&S®SFI100A vector signal generator can be used with the NRP Power Sensors to realize close loop power control at the output of a device under test such as a power amplifier.

The signal generator come in different frequency ranges. Using a program is there a way to tell the frequency range of the SMB100A for example?

I want to control my HMP using the RS-232 port on the HO720. Unfortunately i do not get any response from the device.

I perform a calibration with remote commands. With the command to start the calibration sweep with a short standard I get this error message. What is the problem?

Oct 12, 2022 | 新闻发布

Cubtek Inc. is using network analyzers from Rohde & Schwarz in the development of 4D imaging radar for RF measurement of the E-band. Rohde & Schwarz oscilloscopes and their independently developed, application-specific integrated circuits (ASIC) provide the best measurement tools for automotive radar research and development.

Rohde & Schwarz instrument security manual for the R&S®NGU power supply series be used in a secured environment.

I get an unwanted 1 kHz tone in the demodulated AF spectrum after starting the generator in the Expert Mode using dialing. Where does this tome come from?

Power Measurements on WLAN Modules with the R&S CMU 200 and with CMUgo

Oct 18, 2005 | AN-No. 1CM55