Promo: What's next? Taking industry leadership or watching from the sidelines?

What's next? Taking industry leadership or watching from the sidelines?

Take the lead with up to 60% off our devices!

R&S®NRQ6 选频功率探头

功率测量里程碑

R&S®NRQ6 选频功率探头
打开灯箱
R&S®NRQ6 选频功率探头
打开灯箱
R&S®NRQ6 选频功率探头
打开灯箱
R&S®NRQ6 选频功率探头
打开灯箱
R&S®NRQ6 选频功率探头
打开灯箱
R&S®NRQ6 选频功率探头
打开灯箱
R&S®NRQ6 选频功率探头
打开灯箱
R&S®NRQ6 选频功率探头
打开灯箱
R&S®NRQ6 frequency selective power sensor, Front High R&S®NRQ6 frequency selective power sensor, Side view R&S®NRQ6 frequency selective power sensor, Front view R&S®NRQ6 frequency selective power sensor, Side view R&S®NRQ6 frequency selective power sensor, Side view R&S®NRQ6 frequency selective power sensor, Side view R&S®NRQ6 frequency selective power sensor, Back view R&S®NRQ6 frequency selective power sensor, Side view

主要特点

  • 50 MHz 至 6 GHz 的选频功率测量
  • 功率测量范围:-130 dBm 至 +20 dBm
  • 100 MHz 测量带宽
  • I/Q 数据捕获以进行射频矢量信号分析
  • 面向低功率调制信号的相位相参测量
  • 年度产品

新型测试与测量设备

R&S®NRQ6 兼具功率计的一流精度和出色的动态范围

R&S®NRQ6 基于接收机技术,可执行低至 -130 dBm 的带限功率测量。R&S®NRQ6 可快速执行精确测量,超越当前可用功率计的局限。除了常规的连续平均测量,R&S®NRQ6 还具备迹线显示和邻道泄漏比 (ACLR) 测量功能。R&S®NRQ6-K1 I/Q 数据接口选件、R&S®NRQ6-K2 功率伺服选件和 R&S®NRQ6-K3 相位相参测量选件进一步完善了 R&S®NRQ6,使其成为新型测试与测量设备。

特性和优点

多种测量功能

基于接收机的架构确保精确、快速

  • 低至 -130 dBm 的连续平均功率测量
  • I/Q 数据捕获以进行射频矢量信号分析
  • 相位相参测量
  • 迹线测量
  • ACLR 测量
  • 超快速触发脉冲测量
  • 单机执行射频功率、误差矢量幅度 (EVM) 和相位测量

使用 R&S®NRQ6 执行脉冲信号迹线测量
打开灯箱

使用 R&S®NRQ6 执行脉冲信号迹线测量

便捷的操作

体积小巧,性能卓越

  • 直观的 Web 图形用户界面
  • 多种自动设置功能
  • 自动化频率跟踪
  • 用于信号检查的频谱显示
  • 硬件接口便于用户使用

20 MHz LTE 信号的信号检查
打开灯箱

20 MHz LTE 信号的信号检查

I/Q 数据捕获

R&S®NRQ6 用作独立的射频前端

R&S®NRQ6 可用作独立的射频前端,以便捕获矢量调制 I/Q 信号。借助 R&S®NRQ6-K1 I/Q 数据接口选件,可以使用 SCPI 指令读取捕获的 I/Q 数据。数据使用 R&S®VSE 等外部软件进行解调和分析。2.10 版 R&S®NRQ6 和 1.70 版 R&S®VSE 可直接采集和控制数据。

使用 R&S®NRQ6 和 R&S®VSE 进行 5G NR 测量
打开灯箱

使用 R&S®NRQ6 和 R&S®VSE 进行 5G NR 测量

使用 R&S®SGT100A 快速启用功率伺服;

在组件测试应用中,被测设备的非线性特性导致难以设置具体的输出功率。R&S®NRQ6-K2 功率伺服选件可在 R&S®NRQ6 和 R&S®SGT100A 之间的触发连接器上启用一个专用串行通信通道。经过若干次迭代之后,所需功率一般可在 1 毫秒至 1.5 毫秒内设置完毕。

使用 R&S®NRQ6 和 R&S®SGT100A 启用功率伺服
打开灯箱

使用 R&S®NRQ6 和 R&S®SGT100A 启用功率伺服

在功率伺服装置中,R&S®NRQ6 还可以使用远程控制命令执行功率测量,无需断开连接。

相位相参测量

校准多个用于波束成形的有源天线模块

同步相位相参测量(R&S®NRQ6-K3 选件)基于两个或多个 R&S®NRQ6 探头之间的主/从关系。主设备将本振信号 (LO) 及其时钟信号 (CLK) 传输至从设备并触发从设备。至多可在 8 个端口测量射频相位,-60 dBm 功率时的典型测量不确定度仅为 0.1°。

R&S®NRQ6 多通道相位差测量
打开灯箱

R&S®NRQ6 多通道相位差测量

使用一个 R&S®NRQ6 主设备(仅用于分配触发、时钟和本振信号)和八个 R&S®NRQ6 从设备的测量结果。

测量速度快

超越传统二极管功率探头的局限

每个基于二极管的功率计在指定频率范围内都没有带宽限制。精确测量低功率信号需要对多个测量样本取平均值,这会增加测量时间。基于二极管的功率计技术已经成熟,产品创新陷入瓶颈。R&S®NRQ6 基于接收机技术,显著提高了低功率信号的测量速度。

连续波信号的测量时间对比
打开灯箱

连续波信号的测量时间对比

测量 -50 dBm 连续波信号时,R&S®NRQ6 的测量时间大约缩短至 NRP8S 的 20,000 分之一。

可用型號

可用型號
型号
频率范围
电平范围
动态范围(基于探头)
LAN 接口
连接器类型

R&S®NRQ6

订单号码 1421.3509.02

频率范围
50 MHz - 6 GHz
电平范围
-130 dBm - +20 dBm
动态范围(基于探头)
最高 150 dBm(取决于分辨率带宽)
LAN 接口
连接器类型
N (m)
规格
频率范围
50 MHz 至 6.0 GHz
阻抗匹配 (SWR)
50 MHz 至 100 MHz < 1.20
> 100 MHz 至 2.0 GHz < 1.13
> 2.0 GHz 至 6.0 GHz < 1.20
功率测量范围
动态范围取决于分辨率带宽(10 Hz 至 400 MHz) -130 dBm 至 +20 dBm
极限电平
最大平均功率 1 W (+30 dBm),连续
最大峰值包络功率 2 W (+33 dBm),最多 1 µs
最大直流电压 ±20 V
射频输入衰减
0 dB,30 dB
测量子范围
射频输入衰减 = 0 dB -130 dBm 至 -10 dBm
射频输入衰减 = 30 dB -100 dBm 至 +20 dBm
分辨率带宽 (RBW)
单边带 (SSB) 模式 10 Hz 至 40 MHz
零中频模式(射频输入频率 ≥ 400 MHz) 50 MHz、80 MHz、100 MHz、400 MHz
采集
采样率 119 MHz 至 121 MHz
显示平均噪声电平 (DANL)
射频输入衰减 = 0 dB
50 MHz 至 100 MHz < –148 dBm (1 Hz)
> 100 MHz 至 400 MHz < -153 dBm (1 Hz)
> 400 MHz 至 2.4 GHz < -156 dBm (1 Hz)
> 2.4 GHz 至 6.0 GHz < -153 dBm (1 Hz)
射频输入衰减 = 30 dB
50 MHz 至 100 MHz < -118 dBm (1 Hz)
> 100 MHz 至 400 MHz < -123 dBm (1 Hz)
> 400 MHz 至 2.4 GHz < -126 dBm (1 Hz)
> 2.4 GHz 至 6.0 GHz < -121 dBm (1 Hz)
绝对功率测量的不确定度
射频输入衰减 = 0 dB
50 MHz 至 100 MHz 0.156 dB(操作温度范围为 +20°C 至 +25°C)
0.167 dB(操作温度范围为 +15°C 至 +35°C)
0.211 dB(操作温度范围为 0°C 至 +50°C)
> 100 MHz 至 400 MHz 0.130 dB(操作温度范围为 +20°C 至 +25°C)
0.143 dB(操作温度范围为 +15°C 至 +35°C)
0.192 dB(操作温度范围为 0°C 至 +50°C)
> 400 MHz 至 3 GHz 0.080 dB(操作温度范围为 +20°C 至 +25°C)
0.100 dB(操作温度范围为 +15°C 至 +35°C)
0.163 dB(操作温度范围为 0°C 至 +50°C)
> 3 GHz 至 6 GHz 0.092 dB(操作温度范围为 +20°C 至 +25°C)
0.110 dB(操作温度范围为 +15°C 至 +35°C)
0.169 dB(操作温度范围为 0°C 至 +50°C)
射频输入衰减 = 30 dB
50 MHz 至 100 MHz 0.176 dB(操作温度范围为 +20°C 至 +25°C)
0.189 dB(操作温度范围为 +15°C 至 +35°C)
0.237 dB(操作温度范围为 0°C 至 +50°C)
> 100 MHz 至 400 MHz 0.147 dB(操作温度范围为 +20°C 至 +25°C)
0.162 dB(操作温度范围为 +15°C 至 +35°C)
0.216 dB(操作温度范围为 0°C 至 +50°C)
> 400 MHz 至 3 GHz 0.093 dB(操作温度范围为 +20°C 至 +25°C)
0.114 dB(操作温度范围为 +15°C 至 +35°C)
0.183 dB(操作温度范围为 0°C 至 +50°C)
> 3 GHz 至 6 GHz 0.105 dB(操作温度范围为 +20°C 至 +25°C)
0.125 dB(操作温度范围为 +15°C 至 +35°C)
0.190 dB(操作温度范围为 0°C 至 +50°C)
相对功率测量的不确定度
任意两个功率电平之间
射频输入衰减 = 0 dB
–60 dBm 至 –20 dBm 0.020 dB
射频输入衰减 = 30 dB
–30 dBm 至 +10 dBm 0.020 dB

可用选项

一般分析
产品
描述
R&S®NRQ6-K1

订单号码 1421.4705.02

描述

I/Q 数据接口

R&S®NRQ6-K2

订单号码 1421.4740.02

描述

使用 SGT100A 的功率伺服

R&S®NRQ6-K3

订单号码 1421.4770.02

描述

相位相参测量

电缆
产品
描述
R&S®NRP-ZKU

订单号码 1419.0658.02

描述

USB-A 接口电缆,长度:0.75 m

R&S®NRP-ZKU

订单号码 1419.0658.03

描述

USB-A 接口电缆,长度:1.5 m

R&S®NRP-ZKU

订单号码 1419.0658.04

描述

USB-A 接口电缆,长度:3 m

R&S®NRP-ZKU

订单号码 1419.0658.05

描述

USB-A 接口电缆,长度:5 m

R&S®NRP-ZK6

订单号码 1419.0664.02

描述

六极接口电缆,长度:1.5 m

R&S®NRP-ZK6

订单号码 1419.0664.03

描述

六极接口电缆,长度:3 m

R&S®NRP-ZK6

订单号码 1419.0664.04

描述

六极接口电缆,长度:5 m

文件
产品
描述
R&S®DCV-1

订单号码 0240.2187.06

描述

校准值文件

R&S®DCV-ZP

订单号码 1173.6506.02

描述

校准值文件打印输出

R&S®ACANRQ6

订单号码 3598.1427.03

描述

R&S® 认证校准

相关视频

了解选频功率探头

本视频解释了基于选频或接收机的射频功率探头和传统热功率探头或二极管功率探头的不同之处。

5月 18, 2020

使用 R&S®NRQ6

本视频介绍了 R&S®NRQ6 选频功率探头,以及如何配置该探头以用于多种常见的测量应用。示例包括迹线和邻道泄漏比测量。视频还介绍了使用 PoE 交换机的装置。

5月 18, 2020

R&S®NRQ6 选频功率探头

R&S®NRQ6 基于接收机技术,可执行低至 -130 dBm 的带限功率测量。

9月 30, 2019

请求信息

如果您有任何疑问或需要了解更多信息,请填写此表格,我们会尽快回复您。

推广许可

你的申请已提交,我们稍后会联系您。
An error is occurred, please try it again later.
大体信息,法律信息

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.